Hey i have a question what is a good cam and lifter kit for a stock 77 ford swb with a 302?also it has the old granny 4 spd if this helps or hurts it. and what would be the biggest 4bbl i could use? i figured a 600cfm or is that to big. I'm not wanting a radical cam just a good one with low end torque etc. Because this is my daily driver. email me with ideas. I was thinking maybe the edelbrock performer kit with carb,cam,lifters an manifold but any ideas...

 

Might want to post on the 73-79 forum here:
1973 - 1979 F-100 And Larger F-Series Trucks - Ford Truck Enthusiasts Forums
or the small block forum here:
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) - Ford Truck Enthusiasts Forums

 

A matched kit from Edelbrock would be good, I'd suggest swapping out the heads for a set of E7TE's as well to bump compression up from the lawn mower levels the stock smog heads are giving you.