<HR style="COLOR: #d1d1e1" SIZE=1><!-- / icon and title --><!-- message --><TABLE width="100%" border=0><TBODY><TR><TD vAlign=top>Where can I look to find settings for the fuel & air intake adjustments for a 1982 Ford F100 302 carburetor?


I rebuilt this carburetor from a kit but am stumped getting the proper adjustments.

Any help would be appreciated!
Thanks, OleDawg



</TD></TR></TBODY></TABLE>

 

A starting place is screw the air/fuel adjustment screws in until the stop then back out about 1.5 turns.

 

This should be what they say in the kit. The kit's instructions should have all the adjustments. You will not find any "Ford" adjustment specs on the mixture screws, because these carbs where not supposed to be adjusted after they left the factory.