Manual pipe bender
Post Fiend
Joined: Jan 2000
Posts: 5,860
Likes: 4
From: Metro Detroit (Redford)
FWIW: When I bent 1" copper pipe for my motorhome generator exhaust, the bender would crimp it, but I moved the bender a half inch or so every time it started to crip, so I ended up with a lot of very minor crimps, rather than one big nasty crimp.
Carpenter Local 745
Joined: Apr 2006
Posts: 5,794
Likes: 11
From: on da beach
Street Queen to the extr3m3
Joined: Jan 2005
Posts: 4,554
Likes: 3
From: Lubbock, Texas
WARNING: i highly suggest not signing up for pirate and start posting away... you will get flamed and you will get flamed hard... There is alot of good info on pirate but you have to sift throught the b.s. to get it. Be very carefull about what you post. as pirate is no where near as forgiving as fte is... I know from personal expierence...
Mountain Pass
Joined: Apr 2008
Posts: 174
Likes: 0
WARNING: i highly suggest not signing up for pirate and start posting away... you will get flamed and you will get flamed hard... There is alot of good info on pirate but you have to sift throught the b.s. to get it. Be very carefull about what you post. as pirate is no where near as forgiving as fte is... I know from personal expierence...
Thread
Thread Starter
Forum
Replies
Last Post
danmansjimmy
Manitoba / Saskatchewan Chapter
31
May 15, 2008 03:46 PM
Steve_Uzi
Aftermarket Products
3
Jul 17, 2002 01:59 PM
