Solid axle with lift?
Carpenter Local 745
Joined: Apr 2006
Posts: 5,794
Likes: 11
From: on da beach
To keep it simple use a Dana 44 from a 66-77 Early Bronco, you will need all the suspension parts too.
Or you can go with full size width Dana 44 or 60s and a 9 inch or full width Ford 8.8.
A 8 inch lift will be about the minimum lift for this SAS.
Or you can go with full size width Dana 44 or 60s and a 9 inch or full width Ford 8.8.
A 8 inch lift will be about the minimum lift for this SAS.
Thread
Thread Starter
Forum
Replies
Last Post
