BIGGER engine
Thread Starter
|
Senior User
Joined: May 2007
Posts: 186
Likes: 0
From: Gallipolis, Ohio
A rebuild is planned for next fall/ winter, when I have time and get the money for it. I'll keep you posted, but plans are for 30 over and a healthy cam with a stall. Transmission has a shift kit now, but may throw in a heavier input shaft for the bigger HP and torque. Port and polish are also on the list.
Question; Does anyone run wheel well exit headers? Just wondering how they do offroad!?
Question; Does anyone run wheel well exit headers? Just wondering how they do offroad!?
Post Fiend
Joined: Mar 2005
Posts: 8,542
Likes: 5
From: Louisiana
Wheel well exit headers (L&Ls) are some pretty good headers and I know several people that run them.
You don't have to worry about trying to run the exhaust through the crossmemeber all on one side( complicated bends, and a pain even for a exhaust shop), and you can keep the exhaust tucked up on the side of the frame and you can run the exhaust pretty much by yourself. It only goes straight.
You don't have to worry about trying to run the exhaust through the crossmemeber all on one side( complicated bends, and a pain even for a exhaust shop), and you can keep the exhaust tucked up on the side of the frame and you can run the exhaust pretty much by yourself. It only goes straight.
Thread Starter
|
Senior User
Joined: May 2007
Posts: 186
Likes: 0
From: Gallipolis, Ohio
Wheel well exit headers (L&Ls) are some pretty good headers and I know several people that run them.
You don't have to worry about trying to run the exhaust through the crossmemeber all on one side( complicated bends, and a pain even for a exhaust shop), and you can keep the exhaust tucked up on the side of the frame and you can run the exhaust pretty much by yourself. It only goes straight.
You don't have to worry about trying to run the exhaust through the crossmemeber all on one side( complicated bends, and a pain even for a exhaust shop), and you can keep the exhaust tucked up on the side of the frame and you can run the exhaust pretty much by yourself. It only goes straight.
GREAT! Just about have me sold on them! But:
What about clearance on the tires and during, axle articulation? Do they rub, or do the headers run tight with the inner fender? Or do you take the inner out?
I would love to run my exhaust tight to the outside of the frame with a set of turn downs right before the rear tires and a set of Flowmasters. SWEEEET!
HELL YEAH!!
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
Tire rub on the fender exit headers would depend on an awful lot.
I have 35" ATs on a 79 F250 with 351M fender exit headers and no lift they dont rub. I also know of a 79 f250 with 18" of lift and 44s that dont rub either. It depends on where you are between these two situations
I have 35" ATs on a 79 F250 with 351M fender exit headers and no lift they dont rub. I also know of a 79 f250 with 18" of lift and 44s that dont rub either. It depends on where you are between these two situations
Senior User
Joined: Dec 2005
Posts: 323
Likes: 0
Yeah, i have these crazy 4 into 1 headers that are all rusty except for where my tires rub at full lock one way or another, where they're really shiny. Don't know anything about the headers, were on there when i got it.
It barely rubs, I don't notice it, so it's not a big deal.
It barely rubs, I don't notice it, so it's not a big deal.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
Thread Starter
|
Senior User
Joined: May 2007
Posts: 186
Likes: 0
From: Gallipolis, Ohio
I have a 4 inch lift, and 37 X 13.5 Boggers. I will have to look tomorrow and see how much room I do have. You can see in the pic below how much room I have between the tire and fender.
Thread
Thread Starter
Forum
Replies
Last Post
