Pullys for my 76 351w
Thread Starter
|
New User
Joined: Oct 2002
Posts: 4
Likes: 0
Pullys for my 76 351w
I have built a 351w for my 56 ford f-100, I am at the point of completeing the front of the motor and I have found that my pullys wont work for a alternator-water pump-harmonic balance combo, this motor had a air pump,and power steering. my lower pully will line up with the alt but not the water pump, any ideas on a water pump pully that will work.
Post Fiend
Joined: Apr 2002
Posts: 7,157
Likes: 1
From: Central Kali
Pullys for my 76 351w
I thought that the water pump pully always had the same grove spacing. Getting the belts to line up is one of the biggest headaches I have come across. You may have to do some hunting in the yards. 
Senior User
Joined: Sep 2002
Posts: 297
Likes: 0
From: Butner,NC
Pullys for my 76 351w
Check out the March performance website. I had a time getting the right pulley combo to fit my 79 351W block;same problem that you are having. I had to use a damper spacer behind lower pulley to get the alt. pulley to line up and got their alt. bracket kit that gives you the correct spacing.
Thread
Thread Starter
Forum
Replies
Last Post
Bill W
1961 - 1966 F-100 & Larger F-Series Trucks
11
Apr 21, 2017 05:48 PM
