door problem

Reply Subscribe

Thread Tools

Search this Thread

Feb 23, 2008 | 03:25 PM

Dan Taylor

Thread Starter

Senior User

Joined: Nov 2007

Posts: 138

Likes: 0

door problem

drivers side door is way out of align. about a inch to low from the pin that locks into the door lock thing. ive tried a few times to realign it but it cant go any higher. there is alot of play when i lifted the bottom of the door up. what could this be? bent hinge?

Feb 23, 2008 | 04:37 PM

ArdWrknTrk

pedant

Joined: Jan 2008

Posts: 23,576

Likes: 40

From: EXTREME southwest CT

Or the pin is gone entirely (sheared)

Did the wind catch it?

Feb 23, 2008 | 05:02 PM

TheRoadVirus

Elder User

Joined: Sep 2005

Posts: 841

Likes: 0

From: Orangeville, Ontario

Yea, most likely you need new door pins. Mine as semi-shot as well. Adjusting the hinges can only help so much.

Feb 23, 2008 | 06:27 PM

netscaner

Elder User

Joined: May 2007

Posts: 754

Likes: 1

From: Solon, Ohio

Replacement hinge pins and bushings are available at most parts stores carrying the "Help" line of aftermarket odds and ends.

I think about 6 bucks apeice.

Feb 23, 2008 | 11:16 PM

Dan Taylor

Thread Starter

Senior User

Joined: Nov 2007

Posts: 138

Likes: 0

thanks ill try that tom. and post what happens

Feb 24, 2008 | 05:22 PM

Dan Taylor

Thread Starter

Senior User

Joined: Nov 2007

Posts: 138

Likes: 0

how do i remove the old pins? hammer?

Feb 24, 2008 | 05:36 PM

ArdWrknTrk

pedant

Joined: Jan 2008

Posts: 23,576

Likes: 40

From: EXTREME southwest CT

There should be instructions on the back of the package.
With the bushing kit you will probably need a drill and punch as well.

I replaced the entire hinge because my hold open springs were busted, but I have done the 'pin kit' on chebbies and vans.