adjustable rockers from crane
Thread Starter
|
Laughing Gas
Joined: Jan 2006
Posts: 883
Likes: 7
From: New-brunswick,Canada
adjustable rockers from crane
I can go from pedestal-mount rocker to an adjustable rocker-arm setup. What is the advantage ? can i use stock pushrod lenght with roller rocker 1.7 ratio 7/16 " stud from crane cams with aussie heads on 400 ? anyone have a similar setup ?
Fleet Mechanic
Joined: Feb 2004
Posts: 1,511
Likes: 334
From: Arlington,Wa
I'm using a similar set-up. I have the Crane screw in stud kit with BBC Crane roller rockers. I have the stock lenght push rods. Everthing seems to work OK. I like having the option to adjust the rockers.
Cargo Master
Joined: May 2003
Posts: 2,561
Likes: 1
From: Earth
Originally Posted by 79F150400M
I'm using a similar set-up. I have the Crane screw in stud kit with BBC Crane roller rockers. I have the stock lenght push rods. Everthing seems to work OK. I like having the option to adjust the rockers.
Senior User
Joined: Nov 2005
Posts: 429
Likes: 0
mustang 81, first off hi, paul kiernan here(nicks dad),
crane cam componets # 52655-16, qoute, crane co.rocker arm stud conversion KIT.
is this you, i own and have run this kit period. for the record i am a staunch supporter of TMI & CRANE cams co inc period. it is your descision and you are asking. my point,that particular crane component is a very FINE product, but is has limitations depending upon what it is you are trying to accomplish. crane produces sells and so does TMI upgrades if you desire. back to # 52655-16, search the archives under father/son and/or pm mr nick and i at home. i give my word of honor, we will tell you the thruth, what we learned and in addittion what cranes outstandind tech department insructed us on particular apps with that PARTICULAR # ONLY. from the horses mouth SIR, to close, i would ask that you allow me to make myself absoutely CLEAR. pay attention to tmi, the elders and the occassional young buck who may be new, but you can tell by the way he speaks mechanically, he is not a fool or a bs artist.everyone MYSELF included STARTS somewhere. it is what comes out of any mans mouth, young or old is what counts. fair enough, pm us man you might find we are okay folks. later paul kiernan md.
crane cam componets # 52655-16, qoute, crane co.rocker arm stud conversion KIT.
is this you, i own and have run this kit period. for the record i am a staunch supporter of TMI & CRANE cams co inc period. it is your descision and you are asking. my point,that particular crane component is a very FINE product, but is has limitations depending upon what it is you are trying to accomplish. crane produces sells and so does TMI upgrades if you desire. back to # 52655-16, search the archives under father/son and/or pm mr nick and i at home. i give my word of honor, we will tell you the thruth, what we learned and in addittion what cranes outstandind tech department insructed us on particular apps with that PARTICULAR # ONLY. from the horses mouth SIR, to close, i would ask that you allow me to make myself absoutely CLEAR. pay attention to tmi, the elders and the occassional young buck who may be new, but you can tell by the way he speaks mechanically, he is not a fool or a bs artist.everyone MYSELF included STARTS somewhere. it is what comes out of any mans mouth, young or old is what counts. fair enough, pm us man you might find we are okay folks. later paul kiernan md.
Thread
Thread Starter
Forum
Replies
Last Post
BroncoWY
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
13
Oct 13, 2007 08:49 AM
xfordman
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
May 15, 2005 09:05 PM
grumpy44
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Sep 21, 2004 09:22 PM
gar
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
19
Jul 26, 2004 02:13 PM
