Splitting vacuum lines?
Thread Starter
|
Senior User
Joined: Jul 2006
Posts: 128
Likes: 0
Splitting vacuum lines?
Can I tap into the vacuum line between the carb and vacuum advance on the dizzy to use as the vacuum line I need to the tranny (C6)? I guess I just don't know if it will hurt the vacuum advance to tap off that line?
Thanks,
CHAZ
Thanks,
CHAZ
Thread Starter
|
Senior User
Joined: Jul 2006
Posts: 128
Likes: 0
I hope not, because I have the vaccuum advance attached to the manifold vacuum port on the carb (Edelbrock). The instructions for the carb said that the timed vacuum is for emission controlled motors, which since mine has all that crap removed it shouldn't be.
My question was just about splitting that line, do I loose any vacuum by splitting it, or will it be ok since it is the small vac line?
Thanks,
CHAZ
My question was just about splitting that line, do I loose any vacuum by splitting it, or will it be ok since it is the small vac line?
Thanks,
CHAZ
Thread
Thread Starter
Forum
Replies
Last Post
1978Crew
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
6
Mar 30, 2006 11:12 AM
mattlog1
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Aug 12, 2002 09:25 PM
