460 Too Much Oil Pressure
#1
460 Too Much Oil Pressure
Guys,
I need help with a problem I'm having with a 460 in my jet boat. Last year I tweaked a pushrod and rocker arm causing a loss of all oil pressure. I have since replaced the parts and now have a reading of 80 plus PSI (the needle is pegging out). Prior to the failure I was running 40-60 PSI. Thanks in advance for any help with this problem.
I need help with a problem I'm having with a 460 in my jet boat. Last year I tweaked a pushrod and rocker arm causing a loss of all oil pressure. I have since replaced the parts and now have a reading of 80 plus PSI (the needle is pegging out). Prior to the failure I was running 40-60 PSI. Thanks in advance for any help with this problem.
#2
460 Too Much Oil Pressure
>Guys,
>I need help with a problem I'm having with a 460 in my jet
>boat. Last year I tweaked a pushrod and rocker arm causing
>a loss of all oil pressure. I have since replaced the parts
>and now have a reading of 80 plus PSI (the needle is pegging
>out). Prior to the failure I was running 40-60 PSI. Thanks
>in advance for any help with this problem.
40-60 is low. My 1990 EFI 460 runs 80+ when cold, 70-72 when good and hot. They have high pressure with stock oil pumps. Nature of the beast.
>I need help with a problem I'm having with a 460 in my jet
>boat. Last year I tweaked a pushrod and rocker arm causing
>a loss of all oil pressure. I have since replaced the parts
>and now have a reading of 80 plus PSI (the needle is pegging
>out). Prior to the failure I was running 40-60 PSI. Thanks
>in advance for any help with this problem.
40-60 is low. My 1990 EFI 460 runs 80+ when cold, 70-72 when good and hot. They have high pressure with stock oil pumps. Nature of the beast.
Thread
Thread Starter
Forum
Replies
Last Post
Lneidlinger
1967 - 1972 F-100 & Larger F-Series Trucks
9
09-29-2015 05:59 PM
Mattmason
1987 - 1996 F150 & Larger F-Series Trucks
3
07-25-2015 09:19 PM
kitsapcountychopper
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
11
04-05-2004 08:56 PM
Steve_Uzi
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
12
01-07-2002 11:27 AM