I need help with codes.
#1
I need help with codes.
Is anybody not busy this weekend that could help pull
codes on my Bronco in or around Werstminster.
I have a nagging code and I'm not sure I'm reading it right.
If you can help you can call me if you like my cell at 410-504-7335.
Almost for got its an 89 302 automatic.
Dave
codes on my Bronco in or around Werstminster.
I have a nagging code and I'm not sure I'm reading it right.
If you can help you can call me if you like my cell at 410-504-7335.
Almost for got its an 89 302 automatic.
Dave
Last edited by 80351; 01-12-2008 at 08:00 AM. Reason: needed info
#3
Originally Posted by 80351
Is anybody not busy this weekend that could help pull
codes on my Bronco in or around Werstminster.
I have a nagging code and I'm not sure I'm reading it right.
If you can help you can call me if you like my cell at 410-504-7335.
Almost for got its an 89 302 automatic.
Dave
codes on my Bronco in or around Werstminster.
I have a nagging code and I'm not sure I'm reading it right.
If you can help you can call me if you like my cell at 410-504-7335.
Almost for got its an 89 302 automatic.
Dave
#4
Originally Posted by glruff
Are you near and Advance Auto store??
I think they can do it for you at not cost.
I think they can do it for you at not cost.
Yes I am, it is the only parts store around here and I just left there.
Even had a Bull**** session with one of the guys there. Just bought the
new MSD cap&rotor.
Thanks,
Dave
Hows things goin.
I was conversing with Tractor Boy last week about something I found out after finding out where he worked. Might be a good idea for a gtg.
Aracadia VFD does a demo derby series every year. The promoter owns a company called Big Dog Offroad and sponsors a bunch of trial rides.
Anyway they also do tractor and truck pulls so I'm trying to get more info.
#5
Originally Posted by flathead95hp
Hey Dave, what kind of code is it? I work in Westminster and I have access to a code reader, and can diagnose it for you, or at least point you in the right direction, Is it affecting drivability? Let me know, I work Monday-Friday 8-5 and this coming Saturday from 8-2. BTW, I'm a mechanic.
I have replaced the following... distributor cause it was cheaper than the PIP
sensor, ignition module, plugs, wires and now doing the cap & rotor but I don't think that is going to do it but I'll try. I've check the connection the best I could
and about ready to start pulling connectors apart and squirting them with dielectric grease but am afraid of causing more trouble.
I can wait until next weekend cause I would have to take off really early to make it before 5.
Let me know where and when.
Thanks
Dave
#7
Trending Topics
#8
Thanks for the offer,
flathead95hp said I could bring it down to where he works
and figure it out.
I think I'm going to try doing something with that connector
going into the module first. It has a broken lock on it. I have
another plug from a remote module I may try.
I told my wife where you worked and she wanted to know if you
could give some help in the summer getting her and the kids back
in fishing.
Dave
flathead95hp said I could bring it down to where he works
and figure it out.
I think I'm going to try doing something with that connector
going into the module first. It has a broken lock on it. I have
another plug from a remote module I may try.
I told my wife where you worked and she wanted to know if you
could give some help in the summer getting her and the kids back
in fishing.
Dave
Thread
Thread Starter
Forum
Replies
Last Post