yet another bracket question
Thread Starter
|
Senior User
Joined: Jun 2002
Posts: 263
Likes: 1
From: British Columbia
yet another bracket question
[updated:LAST EDITED ON 15-Dec-02 AT 06:30 PM (EST)]OK here's the low down, I am putting a 429 into my 74' F-250 4x4. I have a bracket and pulley setup off of a 77' 2wd 460. Everything should work except for the PS pump bracket as it is too low and the pulley will hit the PS box.
My question is this, if I use the PS bracket from LandL products, can I also use all my other brackets and pullies in conjuction with it? Or do I have to use the bracket setup as a set from L and L . My concerns are mainly belt alignment I guess.
Any feedback or comments would be great. BTW I emailed L and L over a week ago with no reply yet.
Nick from the frozen north
1974 F-250 4X4
soon to be 429
dana 60 front and rear
My question is this, if I use the PS bracket from LandL products, can I also use all my other brackets and pullies in conjuction with it? Or do I have to use the bracket setup as a set from L and L . My concerns are mainly belt alignment I guess.
Any feedback or comments would be great. BTW I emailed L and L over a week ago with no reply yet.
Nick from the frozen north
1974 F-250 4X4
soon to be 429
dana 60 front and rear
New User
Joined: Jan 2008
Posts: 0
Likes: 24
yet another bracket question
Click the photo of my truck then > scroll down to the tech link on the very top of the list.
Dennis
F.T.E. Assistant Administrator
http://www.clubfte.com/users/mil1ion/SigSanta.JPG
[font color=red]
"May The Spirit Of Christmas Be An Inspiration To You Throughout The Year"[/font]
[link:www.ford-trucks.com/guidelines.html|Club FTE]
[link: motorhaven.autoanything.com|How YOU Can Support This Site]
[link:www.clubfte.com/users/mil1ion/Mil1ion.html|My Website,"North Of The 49th"]
Elder User
Joined: Nov 2002
Posts: 594
Likes: 0
yet another bracket question
I emailed L-n-L 2 months ago and still haven't gotten a reply. However, I did call them and placed an order for a 12 inch clutch and flywheel about 1.5 months ago. I got it 5 days later, its nice, really nice, but they just don't do email I figure.
Thread Starter
|
Senior User
Joined: Jun 2002
Posts: 263
Likes: 1
From: British Columbia
yet another bracket question
[updated:LAST EDITED ON 18-Dec-02 AT 02:45 AM (EST)]I guess my best bet is to phone them, they probably get a lot of junk E-mail. Dennis you site was one of the first I visited before I started this endeavour. My difference is I have a 4spd. and a pickup. Once I saw the setup I needed from a 78' E-250 with a saginaw pump (just like yours) and I thout that I would come back next week with tools and cash in hand, well you could probably guess what happened. When I came back to inquire where the van went the #%!*%@ counterman said that they just CRUSHED IT!!! Anyways I am over that now.... almost. Oh well... guess I better phone L and L this week.
Thanks Guys.
Nick from the frozen north
1974 F-250 4X4
soon to be 429
dana 60 front and rear
Thanks Guys.
Nick from the frozen north
1974 F-250 4X4
soon to be 429
dana 60 front and rear
Thread
Thread Starter
Forum
Replies
Last Post
nickelndime79
1973 - 1979 F-100 & Larger F-Series Trucks
8
Mar 26, 2012 09:06 PM
FordTrucksKickGM
1973 - 1979 F-100 & Larger F-Series Trucks
10
Oct 21, 2008 07:42 PM
velcro7279
1973 - 1979 F-100 & Larger F-Series Trucks
5
Jun 8, 2006 11:10 AM
idahocrewcab
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
7
Nov 21, 2000 08:23 AM
