post your setup
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
Correct me if Im wrong but they look like chrome steelies with black centers.
Not as bling as the 20" spinners hes using on his 150.
Or the trailer hes using to take it to mudfest
http://www.youtube.com/watch?v=pVhhx...eature=related
Not as bling as the 20" spinners hes using on his 150.
Or the trailer hes using to take it to mudfest
http://www.youtube.com/watch?v=pVhhx...eature=related
just another Rockwell looser
Joined: Feb 2003
Posts: 4,042
Likes: 0
From: Cocoa, FL
Originally Posted by STGFordCrazy04
Correct me if Im wrong but they look like chrome steelies with black centers.
Not as bling as the 20" spinners hes using on his 150.
Or the trailer hes using to take it to mudfest
http://www.youtube.com/watch?v=pVhhx...eature=related
Not as bling as the 20" spinners hes using on his 150.
Or the trailer hes using to take it to mudfest
http://www.youtube.com/watch?v=pVhhx...eature=related
that is THE gheyest trailer ive ever seen.....
yeah they are just steelies..... theres plenty of places to get them...
20" spinners? neg-
20x14 db's~!!!!!!!!!!!!!
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
Oh btw check out the same trailer with some mouth breather showing it off. This world is filled with some truely dumb people who have way too much time and money on their hands.
http://www.youtube.com/watch?v=P7ZyDznxHCs
http://www.youtube.com/watch?v=P7ZyDznxHCs
just another Rockwell looser
Joined: Feb 2003
Posts: 4,042
Likes: 0
From: Cocoa, FL
Originally Posted by STGFordCrazy04
Come on quad. You know you want spinners! Stazworks wont keep going once the truck stops and thats whats really cool....well they shouldnt unless something drastic happens.
or i could somehow mount a rockring on some bearings so when i stop the rock ring would keep spinning....that would be kinda different..
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
Hells yeah! get one of those nasty looking rock rings with the arm ravaging spikes like DIY4x.com Double Ripper. That should be fun changing a tire on! esp with a half **** tire tool
If you figure it out, make me a set for 16.5s
If you figure it out, make me a set for 16.5s
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Year: 1980
Make: Ford
Model: F100
2wd or 4wd: 4WD
Tire Size: 39.5" Boggers
Wheel Size: 16.5X14
Lift kit size and Brand if not stock: Superlift,Skyjacker, anywhere from 4 to 8"
Torsion bar Rating or Code: What the hell is that?
Torsion bars cranked or not and if so how much.: Are you high?
Torsion bar keys if any: I guess so.
Lift Blocks? 2" in rear
Add-A-Leafs?No
Body Lift? Anywhere from 1 to 4"
Aftermarket Bumpers? Custom built rear w/ D ring
Fender Height Measurements: Bout chest high
Any fender or body trimming needed? (If so where?) No trimming, but the boggers beat them back pretty good.
See Killer III album for pics.
Serious stuff: 460 Cobra Jet w/ Camden roots blower
C6
NP 205
60 front w/ 5:13's and Detroit
70 Rear w/ 5:13's and detroit
Tractor pull headers out the hood
Full internal roll cage
Racing seats w/ harness'
Runnin' on VP 105 race fuel.
That should cover it.
Here's a video of me hitting the mud pit wall in it.
WWW.DEATHROWDIESEL.COM/C27.wmv
Make: Ford
Model: F100
2wd or 4wd: 4WD
Tire Size: 39.5" Boggers
Wheel Size: 16.5X14
Lift kit size and Brand if not stock: Superlift,Skyjacker, anywhere from 4 to 8"
Torsion bar Rating or Code: What the hell is that?
Torsion bars cranked or not and if so how much.: Are you high?
Torsion bar keys if any: I guess so.
Lift Blocks? 2" in rear
Add-A-Leafs?No
Body Lift? Anywhere from 1 to 4"
Aftermarket Bumpers? Custom built rear w/ D ring
Fender Height Measurements: Bout chest high
Any fender or body trimming needed? (If so where?) No trimming, but the boggers beat them back pretty good.
See Killer III album for pics.
Serious stuff: 460 Cobra Jet w/ Camden roots blower
C6
NP 205
60 front w/ 5:13's and Detroit
70 Rear w/ 5:13's and detroit
Tractor pull headers out the hood
Full internal roll cage
Racing seats w/ harness'
Runnin' on VP 105 race fuel.
That should cover it.
Here's a video of me hitting the mud pit wall in it.
WWW.DEATHROWDIESEL.COM/C27.wmv
Last edited by RubberDuck; Dec 23, 2007 at 10:31 PM.
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Thanks brother. It looks alot better with all the tires on it. But it was alot of fun removing them. LOL Your rig reminds me of the truck I built my bogger out of. It was a 77 crewcab high boy.
i ain't rite
Joined: Mar 2005
Posts: 65,558
Likes: 5,591
From: Marlboro Mental Hospital.
Year=88
Make=guess
Model=superduty
4wd
Tire Size=36X12.5X16.5
Lift kit size and Brand=modified trailmaster
Aftermarket Bumpers= homemade front
Fender Height Measurements= nose bleed high
Make=guess
Model=superduty
4wd
Tire Size=36X12.5X16.5
Lift kit size and Brand=modified trailmaster
Aftermarket Bumpers= homemade front
Fender Height Measurements= nose bleed high
Post Fiend
Joined: Mar 2005
Posts: 8,542
Likes: 5
From: Louisiana
Year 79
Make Duh
Model Bronco
Tire Size 36x13.50-15
Wheel Size 15x10 Mickey Thomson Classic IIs
Lift kit size 6"deaver superflex coils and block add a leaf
Lift Blocks? 3"(hate them, but they work)
Add-A-Leafs? 3"
Body Lift? HA!!!!
Aftermarket Bumpers? Front-Tube bumper w/grill guard, Rear- square tube bumper with swinging tire mount.
Fender Height Measurements ?
Any fender or body trimming needed? (If so where?) None, but not out of question in the future.
More importanly......
I just finished installing a 429 bored .40 over with 10.2:1 Compression ratio running on propain
Hahaha..... Just joking..... stock 400 with headers and straight pipes(hopeing to install the edelbroke intake and holley 4v carb soon along with a new cam, lifters, new valve springs, rods, and double roller timing chain.
Stock C6 tranny(nothing special, but at least it works, sorry captain and quad don't mean to add salt to the wound, I just had too)
D44 with 4.56 gears and an aussie locker
9" w/ 4.56 gears and a spool.
NP205
Make Duh
Model Bronco
Tire Size 36x13.50-15
Wheel Size 15x10 Mickey Thomson Classic IIs
Lift kit size 6"deaver superflex coils and block add a leaf
Lift Blocks? 3"(hate them, but they work)
Add-A-Leafs? 3"
Body Lift? HA!!!!
Aftermarket Bumpers? Front-Tube bumper w/grill guard, Rear- square tube bumper with swinging tire mount.
Fender Height Measurements ?
Any fender or body trimming needed? (If so where?) None, but not out of question in the future.
More importanly......
I just finished installing a 429 bored .40 over with 10.2:1 Compression ratio running on propain
Hahaha..... Just joking..... stock 400 with headers and straight pipes(hopeing to install the edelbroke intake and holley 4v carb soon along with a new cam, lifters, new valve springs, rods, and double roller timing chain.
Stock C6 tranny(nothing special, but at least it works, sorry captain and quad don't mean to add salt to the wound, I just had too)
D44 with 4.56 gears and an aussie locker
9" w/ 4.56 gears and a spool.
NP205
Logistics Pro
Joined: Aug 2003
Posts: 4,701
Likes: 6
Year 74
Make
Model F250
Tire Size 36x12.50-16.5
Wheel Size 16.5x9.75 Jackmans
Lift kit size About 7" (from 2wd)
Lift Blocks? Now gone
Add-A-Leafs? No
Body Lift? Negatory
Aftermarket Bumpers? Front-Tube bumper w/grill guard that I have been working on for over a year. Rear- 6" channel Iron
Fender Height Measurements They are stock ford fenders
Any fender or body trimming needed? (If so where?) Just the front lip of the front fenders
What it used to look like
What it looks like now
MERRY CHRISTMAS EVERYBODY!!
Make
Model F250
Tire Size 36x12.50-16.5
Wheel Size 16.5x9.75 Jackmans
Lift kit size About 7" (from 2wd)
Lift Blocks? Now gone
Add-A-Leafs? No
Body Lift? Negatory
Aftermarket Bumpers? Front-Tube bumper w/grill guard that I have been working on for over a year. Rear- 6" channel Iron
Fender Height Measurements They are stock ford fenders
Any fender or body trimming needed? (If so where?) Just the front lip of the front fenders
What it used to look like
What it looks like now
MERRY CHRISTMAS EVERYBODY!!
Elder User
Joined: Apr 2007
Posts: 937
Likes: 0
From: Winter Garden, FL
Year 1997
Make take a guess
Model F150
2wd or 4wd 4x4
Tire Size 285/70/17 (33s)
Wheel Size 17
Lift kit size and Brand if not stock none
Torsion bar Rating or Code: i know i have them but dunno rating
Torsion bars cranked or not and if so how much. no
Torsion bar keys if any no
Lift Blocks? no
Add-A-Leafs? no
Body Lift? never!
Aftermarket Bumpers? grille guard does that count
Fender Height Measurements 37.5 in
Any fender or body trimming needed? (If so where?) no, need to either trim or take of mud flaps cause tires hit em though
Make take a guess
Model F150
2wd or 4wd 4x4
Tire Size 285/70/17 (33s)
Wheel Size 17
Lift kit size and Brand if not stock none
Torsion bar Rating or Code: i know i have them but dunno rating
Torsion bars cranked or not and if so how much. no
Torsion bar keys if any no
Lift Blocks? no
Add-A-Leafs? no
Body Lift? never!
Aftermarket Bumpers? grille guard does that count
Fender Height Measurements 37.5 in
Any fender or body trimming needed? (If so where?) no, need to either trim or take of mud flaps cause tires hit em though