HPOP Install
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
From one Cody to another. Here's my writeup. It will take you bolt for bolt. But be warned, there are NO true torque specs in it. That's up to you. Enjoy.
https://www.ford-trucks.com/forums/5...-part-1-a.html
https://www.ford-trucks.com/forums/5...-part-1-a.html
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 232
Likes: 0
Wow!!! Very impresive write up and I think that will do it for the hpop. I plan on doing this mod this week. The write up on your injectors, can you put a link up for that. I plan on doing the Stage III hybrids. I know you have to get a fuel system and studs but Il do that later down the road. I have a dp chip and Il have jody defuel them for me so Il stay in the safe zone. ON the DIY injectors how hard were they and how long did it take you?
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Cody, I didn't end up doing a "writeup" on the injector install. There are several good sources to choose from. I just kinda grabbed from several of them. The DIY's are very easy. The first one took me about 1 1/2 hours, and got quicker after that. By the third one, I didn't need instructions and was knocking them out in about 40min.
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
