cam kit?
Freshman User
Joined: Sep 2007
Posts: 48
Likes: 0
Oregon Cams
=
hey, just starting to do my rebuild on my 390 and went with an RV 2 cam from oregon custom cams grinds. will let you guys know on the results in acouple days. Helps that I live in Oregon too...
Originally Posted by Ford428CJ
What I would do is call Ken at Oregon Cam Grinders. He has been building FE's then most of us have been alive. Trust me, give him a call and he will set you up! His prices are very reasonable compared to others! Get a quote from him. It wont hurt, I promise you LOL.
http://home.pacifier.com/~orcam/regrinding.html
http://home.pacifier.com/~orcam/regrinding.html
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by adamraaron
=
hey, just starting to do my rebuild on my 390 and went with an RV 2 cam from oregon custom cams grinds. will let you guys know on the results in acouple days. Helps that I live in Oregon too...
hey, just starting to do my rebuild on my 390 and went with an RV 2 cam from oregon custom cams grinds. will let you guys know on the results in acouple days. Helps that I live in Oregon too...
Thread Starter
|
Freshman User
Joined: Feb 2007
Posts: 32
Likes: 0
i would love to know the results. I have the chance to purchase a 390 really cheap for my 66' and it comes with power steer and power brakes. so i'm in a toss up right now after spending some money to build up my 352?
Posting Guru
Joined: Nov 2005
Posts: 1,302
Likes: 0
From: Madison, SD
Originally Posted by Ford428CJ
I don't think that you will be disappointed with it! Keep us posted....
Elder User
Joined: Mar 2004
Posts: 747
Likes: 0
From: Klamath Falls OR
Originally Posted by Dave Severson
Does the company you suggested do roller cams and small base circle cams too????? Got an address or phone for them?
Here is his web site. Hope this helps ya Dave!
http://home.pacifier.com/~orcam/regrinding.html
Logistics Pro
Joined: Oct 2005
Posts: 3,785
Likes: 4
From: Mddl A MexCans
Originally Posted by pbear6969
I found this in another thread....
LOL..Got my stuff from (Alexparts) on ebay and he's a great guy and knows enough to get you going thats for sure, hell they're springs.. rated for a seat pressure & lift max with a coil bind #..how hard can it be
search FE valve spring on ebay you'll find him
Senior User
Joined: Dec 2005
Posts: 314
Likes: 0
From: North Carolina
Originally Posted by Redmanbob
hell I dont remember what the heck that was from but LOL..
Got my stuff from (Alexparts) on ebay and he's a great guy and knows enough to get you going thats for sure, hell they're springs.. rated for a seat pressure & lift max with a coil bind #..how hard can it be search FE valve spring on ebay you'll find him
LOL..Got my stuff from (Alexparts) on ebay and he's a great guy and knows enough to get you going thats for sure, hell they're springs.. rated for a seat pressure & lift max with a coil bind #..how hard can it be
search FE valve spring on ebay you'll find him
Posting Guru
Joined: Nov 2005
Posts: 1,302
Likes: 0
From: Madison, SD
Originally Posted by Ford428CJ
I'm sure that Ken would. But I'm not Ken LOL. He has been racing FE's for years and years. He can make one heck of a bump stick!!!
Here is his web site. Hope this helps ya Dave!
http://home.pacifier.com/~orcam/regrinding.html
Here is his web site. Hope this helps ya Dave!
http://home.pacifier.com/~orcam/regrinding.html
Thread
Thread Starter
Forum
Replies
Last Post
sweetlou1
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
17
Mar 17, 2013 08:18 PM
JRB65
1973 - 1979 F-100 & Larger F-Series Trucks
23
Dec 12, 2012 10:27 AM
ericford1984
Performance & General Engine Building
2
Dec 5, 2011 08:47 PM
Needsoles
Performance & General Engine Building
10
May 24, 2009 02:46 PM
