DTC P1450 NEED HELP!
Thread Starter
|
New User
Joined: Feb 2002
Posts: 5
Likes: 0
DTC P1450 NEED HELP!
Hello. My 97 F150 4.6 set a code P1450 which translates to "Unable to release fuel tank pressure." Anyone have an idea what the most LIKELY defective part is that would cause this? I've checked the fuel/vent lines to and from the charcoal canister but none are cracked, broken, or kinked. Could the sensor that mounts on the canister be defective? I'm stumped!.
Thanks in advance for ideas/suggestions.
Thanks in advance for ideas/suggestions.
New User
Joined: Apr 2002
Posts: 3
Likes: 0
DTC P1450 NEED HELP!
P1450 is "Unable to Bleed Up Fuel Tank Vacuum" according to www.obdii.com/ and my scanner's documentation.
Check to make sure your gas cap is sealing. If the o-ring looks warn or grayish in color, replace the cap.
Check to make sure your gas cap is sealing. If the o-ring looks warn or grayish in color, replace the cap.
Thread
Thread Starter
Forum
Replies
Last Post
athenshome
1997 - 2006 Expedition & Navigator
3
Sep 25, 2013 11:25 PM
