Retard Engineering
Thread Starter
|
Post Fiend
Joined: Oct 2003
Posts: 6,214
Likes: 13
From: New Jersey
Retard Engineering
Not everyone who lifts a truck has a clue...
http://128.83.80.200/taco/scarysteering.html
Many, many pictures and descriptions of completely idiotic fabrication on 4x4's.
Be warned - if you have ANY engineering knowledge or ANY interest in vehicle dynamics, these pictures more than likely will cause countless hours of twitching and other nervous system disorders.
I'm still twitching.
http://128.83.80.200/taco/scarysteering.html
Many, many pictures and descriptions of completely idiotic fabrication on 4x4's.
Be warned - if you have ANY engineering knowledge or ANY interest in vehicle dynamics, these pictures more than likely will cause countless hours of twitching and other nervous system disorders.
I'm still twitching.
i ain't rite
Joined: Mar 2005
Posts: 65,564
Likes: 5,601
From: Marlboro Mental Hospital.
when i saw that site a few years ago, i was up for almost a week without being able to go to sleep.
every time i layed down, i would have a nightmare the suspention fairys were going to attack the rattletrap, and would wake up in a cold sweat, forcing me to go outside and protect the rattletrap with the 10 gauge shotgun for the night.
every time i layed down, i would have a nightmare the suspention fairys were going to attack the rattletrap, and would wake up in a cold sweat, forcing me to go outside and protect the rattletrap with the 10 gauge shotgun for the night.
Thread Starter
|
Post Fiend
Joined: Oct 2003
Posts: 6,214
Likes: 13
From: New Jersey
I have some angle iron and a flux-core welder! We wouldn't even have to measure anything! I have enough shortish pieces in the 2-6" range!
I'll make him a nice z-bar drag link and a 14" deep pitman arm out of copper tubing!
I'll make him a nice z-bar drag link and a 14" deep pitman arm out of copper tubing!
Elder User
Joined: Nov 2007
Posts: 538
Likes: 0
From: North NJ
Originally Posted by frederic
I'll make him a nice z-bar drag link and a 14" deep pitman arm out of copper tubing!
Trending Topics
i ain't rite
Joined: Mar 2005
Posts: 65,564
Likes: 5,601
From: Marlboro Mental Hospital.
Originally Posted by NJF350SD
Can you make me one out of 3/4 PVC? I don't want to have to worry about rust.
if the price is rite.
but the best thing he is good at is making a mess.
just look at his garage.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
oldford78
1973 - 1979 F-100 & Larger F-Series Trucks
3
Apr 2, 2015 11:00 AM
IDIDieselJohn
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
14
Jan 8, 2014 10:58 PM