Trans and Engine Oil Temp Gauges

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2007 | 10:08 PM

rich93cw

Thread Starter

Senior User

Joined: May 2006

Posts: 125

Likes: 0

From: Near the Chesapeake Bay

Trans and Engine Oil Temp Gauges

Has anyone installed any of these? Where did you find space to put the gauges?
Thanks,
Rich

Oct 26, 2007 | 07:42 AM

myexpo02

Senior User

Joined: Feb 2006

Posts: 172

Likes: 0

From: Kansas City, MO

I would like to see a nice setup for the Trans myself. I think it would be the most useful of any guage.

Oct 26, 2007 | 02:46 PM

07EXPYEL

Senior User

Joined: Jun 2007

Posts: 244

Likes: 0

I've asked the question in the fourm already and posted a response to your engine oil cooler post. The data is in the ECM, but you must have a compatible code reader to display the extended data. For Expedition I found a couple of options, but haven't tried any. I wanted to use the Edge Evoultion programmer & gauge, but it does not work for the 2007 Expedition (5.4 F-150 ONLY).
You might want to checkout:
www.scangauge.com
www.dashhawk.com
http://www.aeroforcetech.com/Fordtech.html

Oct 30, 2007 | 07:55 AM

rich93cw

Thread Starter

Senior User

Joined: May 2006

Posts: 125

Likes: 0

From: Near the Chesapeake Bay

[QUOTE=07EXPYEL]I've asked the question in the fourm already and posted a response to your engine oil cooler post. The data is in the ECM, but you must have a compatible code reader to display the extended data. For Expedition I found a couple of options, but haven't tried any. I wanted to use the Edge Evoultion programmer & gauge, but it does not work for the 2007 Expedition (5.4 F-150 ONLY).
You might want to checkout:
www.scangauge.com
www.dashhawk.com
http://www.aeroforcetech.com/Fordtech.html[/QUOTE]

Great list! Looks like only the DashHawk will read both trans oil temp and engine oil temp on Fords. Looks like a great tool for $299. To bad its not discounted somewhere yet.

Thanks,
Rich