what heads do i have?
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 162
Likes: 0
what heads do i have?
they are marked windsor and they are off of my new to me 351 they have guide plates for the pushrods and they have what looks to be cast rockers and they are the adjustable type and not the crank down till they stop kind the intake valve measures about inches and on the exhoust port they are 2 drilled holes for two different exhoust headers I looked for numbers but didnt see any. they are simply marked WINDSOR IN THE CORNER and they also have the heart shaped combustion chamber. are these going to be better than my ported and polished e6se heads just wanted to know which ones to use for best performance
Last edited by chevygoneford; Oct 8, 2007 at 07:40 PM.
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Do they look like this.. http://www.worldcastings.com/prods_pages/heads/windsor.htm
If so then yes these are better heads than the E6 casting.
If so then yes these are better heads than the E6 casting.
Thread Starter
|
Senior User
Joined: Nov 2004
Posts: 162
Likes: 0
exactly
my friend took it upon hiself to take them to the machine shop today and they are world heads they are the seniors 200 cc runner and the cast rocker are supposed to be stronger with less flex one step under roller rockers from what he was told .they have the guide plates on them . and we just finished putting my springs retainers and locks on them they said the same as you alot better than the e6 heads and they flow alot better thanks for the help
john
john
Thread
Thread Starter
Forum
Replies
Last Post
Snorri_B
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
6
Apr 25, 2011 07:24 PM
46069dord
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
Feb 25, 2008 07:48 PM
