AIH removal, CCV mod
Hotshot
Joined: Dec 2003
Posts: 18,423
Likes: 9
From: iowa
Originally Posted by 1996pwrstrk
Its probably burnt out anyway.
Thread Starter
|
Cargo Master
Joined: Sep 2007
Posts: 2,470
Likes: 535
From: Chandler, AZ
Originally Posted by smoky_diesel
1) Does the 'Puter have a problem if I remove the air intake heater (AIH)? Does it do a self test to see if the element is intact? Can I just insulate the wires or do I need a resistor to trick the system?
I did this Mod, and got this code
P0541 - Intake Air Heater Circuit Low
Big brother is watching.....
Senior User
Joined: Nov 2006
Posts: 160
Likes: 0
I was getting that same code after I removed my IAH, so I installed this http://www.puredieselpower.com/catal...541-p-109.html & no more code.
Senior User
Joined: Sep 2006
Posts: 484
Likes: 0
From: CT
Originally Posted by smoky_diesel
I did this Mod, and got this code
P0541 - Intake Air Heater Circuit Low
Big brother is watching.....
P0541 - Intake Air Heater Circuit Low
Big brother is watching.....
has everyone had this code thrown when doing this mod? and R U guys just ignoring it, or installing that cable that the poster below talks about?
Thread
Thread Starter
Forum
Replies
Last Post
BWST
1999 - 2003 7.3L Power Stroke Diesel
62
Mar 1, 2019 11:57 AM
