Request and a statement...

Reply Subscribe

Thread Tools

Search this Thread

Sep 25, 2007 | 09:19 AM

#16

m78

More Turbo

Joined: Apr 2007

Posts: 615

Likes: 93

did yours come with the wide metal U shaped plate?

Sep 25, 2007 | 10:43 AM

#17

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

Yes, does we haven't gotten that far yet. It kinks before we can even tighten things down.

Sep 25, 2007 | 11:25 AM

#18

m78

More Turbo

Joined: Apr 2007

Posts: 615

Likes: 93

Maybe your fill hose is not ridgid enough. where did you get it. theres also room for play if you shortened it.where is it kinking? also the hose for the rear hardly has a bend in it, did the give you the correct one?

Sep 25, 2007 | 12:07 PM

#19

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

The factory one kinked shortly after they put a new tank in. It's kinking just outside of the bends on each end.

Sep 25, 2007 | 12:21 PM

#20

oem78

Tuned

Joined: Oct 2003

Posts: 390

Likes: 2

Maybe pressure in the tank is causing the kink, check the vents and gas cap.

Sep 25, 2007 | 12:45 PM

#21

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

The hose was slipped on and it kinked. We did not crank the truck, tighten the gas cap down, and the vents were cleared.

Sep 25, 2007 | 01:35 PM

#22

just-n-time

Senior User

Joined: Aug 2007

Posts: 448

Likes: 0

From: Winnfield,La.

So if I am correct in what you describe,it sounds like the filler pipe is to long and the pressure from forcing the pipe into that distance is causing the pipe to fold up (kink). Can you cut it in the straight section and shorten it? you may have to build an aluminum connector and clamp it. JNT

Sep 25, 2007 | 03:19 PM

#23

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

Ok... so...

1. Try to shorten pipe.
2. If shortening fails, install connector...?

I get it right?

FTE Stories

Ford Trucks for Ford Truck Enthusiasts

10 Things Every Truck Owner NEEDS (2026 Edition)

Michael S. Palmer

Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath

Verdad Gallardo

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Joe Kucinski

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Brett Foote

Top 10 Ford Truck Tragedies

Joe Kucinski

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

Brett Foote

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Michael S. Palmer

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Verdad Gallardo

10 Best Ford Truck Engines We Miss the Most!

Joe Kucinski

2026 Shelby F-150 Off-Road: Better Than a Raptor R?

Brett Foote

Sep 25, 2007 | 04:38 PM

#24

m78

More Turbo

Joined: Apr 2007

Posts: 615

Likes: 93

I just did mine last month and didnt have any of these problems,But I didnt put a different tank in. Do you know if they used the correct tank?

Sep 26, 2007 | 06:37 AM

#25

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

They used a polymer tank. I have a feeling noone's pushing the hose on hard enough.

Sep 26, 2007 | 11:50 AM

#26

Mil1ion

New User

Joined: Jan 2008

Posts: 0

Likes: 24

You mean "Peter Noone" of Herman's Hermit's ?

( No one... is 2 words)

Perhaps the fuel hose you have is of a different material that is prone to easier collapsing?

Sep 26, 2007 | 12:35 PM

#27

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

But why would the factory hose do the exact same thing, in the exact same spots. The one I bought was from Dennis Carpenter.

Sep 26, 2007 | 12:45 PM

#28

Mil1ion

New User

Joined: Jan 2008

Posts: 0

Likes: 24

Has the bed settled ?

This is usually the reason for kinked hoses.

Sep 26, 2007 | 01:49 PM

#29

Forge

Thread Starter

Senior User

Joined: Aug 2007

Posts: 120

Likes: 0

Don't know. There're no tool marks on the bed bolts...

There appear to be marks on the gas strap bolts...

from when they changed the tank...

(P.s. Nonne, ain't two ah werd.)