360-460 swap
Thread Starter
|
Freshman User
Joined: May 2002
Posts: 36
Likes: 0
From: BOULDER CITY USA
360-460 swap
im sure this has been gone over before, but i cant find something on it. i have a 72 F250 camper special sport 2wd 360 w/ c6 tranz. can i bolt in a 460? what mods or creations need to be done. any help will be graciously accepted.
if yer knuckles arn't bleeding
or you don't have spare parts
you've done something wrong.
if yer knuckles arn't bleeding
or you don't have spare parts
you've done something wrong.
Freshman User
Joined: Apr 2002
Posts: 38
Likes: 0
From: millington United States
360-460 swap
A buddy of mine did this swap in his '74. The mounts will work fine but the bolt pattern on the tranny case don't line up. A new bellhousing should work fine.
'75 3/4 ton hi-boy. 360/2bbl. dana60/HD44(4.10 gears)
'75 3/4 ton hi-boy. 360/2bbl. dana60/HD44(4.10 gears)
New User
Joined: Jun 2002
Posts: 13
Likes: 0
From: Hampton USA
360-460 swap
I am doing the same thing for my '67 Ranger 250 Camper Special. Couldn't turn down the deal I got on a fresh, healthy 460. When you get a trans for the 385 series, get the yoke with it. It is my understanding that the yoke is a slip, instead of a mount plate like the FE C6's. I have also been told that this pattern is the same as the 351M-400, so you can take one out of almost any late 70's truck. I didn't know about the mounts, if you find out something, let me know.
THX, Roger
THX, Roger
Thread
Thread Starter
Forum
Replies
Last Post
19704X4F250
1967 - 1972 F-100 & Larger F-Series Trucks
61
Apr 29, 2008 02:01 PM
65f100CoryE.
1961 - 1966 F-100 & Larger F-Series Trucks
11
Apr 10, 2006 04:57 PM
