Kingpin rebuild
Thread Starter
|
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
Kingpin rebuild
Im currently rebuilding a Dana 60 front for my 79 F250 and Im biting the bullet and replaicing the kingpins. The problem Im having is that my local napa doesnt have a listing for a 79 F250 or F350 having kingpins. All they list is ball joints or the king pins that go all the way through the knuckle (about 7" long) I also have all the dana/spicer part numbers for the complete rebuild kit and the different bearings races and seals seperately but they dont transfer over on napaonline.com. Its a long story but I buy all my parts from napa because of the business I own. I will not buy a rebuild kit from another source unless its impossible to get from napa. Anyone ever get these from napa? Would the rebuild kit from a dodge or chevy D60 be the same?
More Turbo
Joined: Jun 2006
Posts: 601
Likes: 0
I believe they are the same. They should be a fairly common item, although I don't shop at NAPA. I get a lot of Dana 60 parts mail order from different companies. One site I use is listed below. Steve has a lot of neat stuff, and his site is cool just to look at and drool (Dana 60, 70 and custom made Dana 80 frontends).
http://differentialeng.com/DanaProducts.htm
http://differentialeng.com/DanaProducts.htm
Thread
Thread Starter
Forum
Replies
Last Post
crazed87bronco
Ford Truck Parts for Sale
0
Aug 14, 2016 09:50 AM
shorerider16
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
4
May 8, 2016 11:16 AM
SuperDuty93
1973 - 1979 F-100 & Larger F-Series Trucks
14
Jun 18, 2015 01:54 PM
