292 bore and stroke?
Senior User
Joined: Jan 2000
Posts: 334
Likes: 1
292 bore and stroke?
Nathan,
I don't know anything about the 312, but my shop manual gives bore and stroke of the 292 as 3.750x3.300. I'm interested in hearing what you find out. Best of luck on the continuing 64 project.
Nate
1964 F-100 Custom Cab 292 V-8 3 spd
1964 F-100 292 V-8 3 spd
1990 F-150 5.8L
I don't know anything about the 312, but my shop manual gives bore and stroke of the 292 as 3.750x3.300. I'm interested in hearing what you find out. Best of luck on the continuing 64 project.
Nate
1964 F-100 Custom Cab 292 V-8 3 spd
1964 F-100 292 V-8 3 spd
1990 F-150 5.8L
Thread Starter
|
Posting Guru
Joined: Aug 1999
Posts: 1,485
Likes: 3
292 bore and stroke?
Thanks, 3B, I was there before but didnt have time to look around. Tell me this, why do they only want to talk about pre 62 blocks? Do they not realize Ford used them in trucks untill 64? I dont get it! Ah well!
Nathan
Nathan
Senior User
Joined: Jan 2000
Posts: 334
Likes: 1
292 bore and stroke?
The 312 boreX stroke is: 3-51/64 x 3-7/16
The 292 bore X stroke is: 3-3/4 x 3-19/64
So, the 312 bore is about .050" over the 292 and stroke is 11/64" inch longer on the 312.
Nate
1964 F-100 Custom Cab 292 V-8 3 spd
1964 F-100 292 V-8 3 spd
1990 F-150 5.8L
The 292 bore X stroke is: 3-3/4 x 3-19/64
So, the 312 bore is about .050" over the 292 and stroke is 11/64" inch longer on the 312.
Nate
1964 F-100 Custom Cab 292 V-8 3 spd
1964 F-100 292 V-8 3 spd
1990 F-150 5.8L
Thread
Thread Starter
Forum
Replies
Last Post
Shadowrider123
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
3
Sep 27, 2014 12:50 PM
46yblock
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
5
Jan 30, 2005 01:47 AM
