E04D Mass Conversion
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 322
Likes: 0
From: Hutto, Tx
Cool. There should be plenty f150s around. I had a 92 that I converted along time ago, but it had an AOD and I bought the conversion for $500 brand new. Too much money for me this time.
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Cars.. yes, but trucks over 8500lb GVWR were still OBD1 until the new body style and motors were introduced in late '97 and '98.
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 322
Likes: 0
From: Hutto, Tx
If I use the 5.0 computer do you mean from a truck or from any car?
It has to be from a vehicle with an EO4D tranny correct?
When you say get it tuned...........how do I do this?
It has to be from a vehicle with an EO4D tranny correct?
When you say get it tuned...........how do I do this?
Trending Topics
Hotshot
Joined: Jul 2002
Posts: 14,285
Likes: 12
From: Bend,OR
yes it must be from an f150 or bronco running 5.0/e4od mass air. getting it tuned is taking to a dyno shop and making a few runs. this will be the best bang for your buck and give you the most potential out of it.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Do you want to do a plug and play swap?
Or are you up to tearing apart both wiring harnesses to remove the MAF, injector, and left side O2 wiring from the donon and insert it into your harness.
Or are you up to tearing apart both wiring harnesses to remove the MAF, injector, and left side O2 wiring from the donon and insert it into your harness.
