3rd Brake Light,Bulb Replacement??
Thread Starter
|
Senior User
Joined: Jul 2004
Posts: 318
Likes: 0
3rd Brake Light,Bulb Replacement??
What's the trick for replacing bulb in 3rd brake light? I took out the two philps screws but the lens won't budge. The black plastic housing moves move than the lens. I tried to gently pry lens out with small screw driver, but no luck. I put some dielectric grease around edges and called it quits for the night.
The lens does come out of the black molding right? The lower portion of molding is very loose, not attached to cab at all, only on top. Does the molding come off, or just lens??
The lens does come out of the black molding right? The lower portion of molding is very loose, not attached to cab at all, only on top. Does the molding come off, or just lens??
Thread Starter
|
Senior User
Joined: Jul 2004
Posts: 318
Likes: 0
Originally Posted by Cuda_jim
The whole thing comes out. The bulb is replaced from the rear. Gently pry it out, it'll go.
Thread
Thread Starter
Forum
Replies
Last Post
dagster
1987 - 1996 F150 & Larger F-Series Trucks
8
Jul 28, 2006 10:07 PM
Primered86XLT
1987 - 1996 F150 & Larger F-Series Trucks
4
Oct 1, 2005 03:09 PM
