Reverse Sensing System (RSS) Problems
Thread Starter
|
New User
Joined: Apr 2007
Posts: 5
Likes: 0
Reverse Sensing System (RSS) Problems
Problem started (probably coincidental) after replacing the multi-function switch in my 2002 Excursion. The dash switch "off" indicator remained light from the moment the vehicle was put in reverse. I noticed the reverse lamp was not functioning and replaced. Now the RSS will function properly as long as I apply the brake, but as soon I release the brake the RSS "off" indicator illuminates and the RSS system is non-functional and subsequent applications of the brake toggles the RSS system. Any suggestions?
Elder User
Joined: Dec 2006
Posts: 594
Likes: 0
From: New Jersey
Are you sure you didnt pinch any of the wires in the column on reassembly after putting in the multi-function? The wiring in these columns has been known to get in the way of moving parts some times, especially after servicing has been performed and things get moved around a bit.
Thread
Thread Starter
Forum
Replies
Last Post
breeze4820
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
19
Feb 14, 2017 03:15 PM
SeminoleSlim
1999 - 2003 7.3L Power Stroke Diesel
25
Jul 15, 2008 10:32 PM
