Latest engine projects
Elder User
Joined: May 2006
Posts: 636
Likes: 1
Originally Posted by danlee
I am scheduled to attend an All Ford Show at Delmar Dragway on the 20th of May. I hope to be able to make a couple of runs down the track. I need someone to make a digital video.
I think that I have a Video Tape camera around somewhere. Maybe the tape can be converted to digital somewhere. I'll look into that.
I think that I have a Video Tape camera around somewhere. Maybe the tape can be converted to digital somewhere. I'll look into that.
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
Originally Posted by kilog55
someone from the delaware chapter has to be going as well, maybe post a thread and see if you can meet up with some of the guys in the area
Mountain Pass
Joined: Dec 2001
Posts: 141
Likes: 0
From: collierville, tn
engine projects...follow up
Originally Posted by TMI
Main thing is the shorter rod gets the charge moving quicker.
Posting Guru
Joined: Mar 2005
Posts: 2,068
Likes: 0
From: western montana
How about the longer rod staying a bit longer at tdc thus increasing torque and the longer rod allowing higher rpm thus increasing hp?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Post Fiend
Joined: Nov 2001
Posts: 5,871
Likes: 0
From: Coutts Canada
It's not totally dialed in yet, and I have a couple of bugs, but it runs great. It's wickedy awesome scary to break traction at 50 mph.
Sounds like you're having fun dan, and tim sounds like business is booming, best of luck and don't be scared to share the builds
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
Originally Posted by mustange70
Fixed it
Sounds like you're having fun dan, and tim sounds like business is booming, best of luck and don't be scared to share the builds
Sounds like you're having fun dan, and tim sounds like business is booming, best of luck and don't be scared to share the builds
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
Originally Posted by kilog55
whats your gearing?? cause that sounds like crazy MPG for a motor with that much thunder.
My compression ratio is 10.8:1, and the motor is Fuel Injected.
I have never gotten close to that mileage with a carb.
Postmaster
Joined: Aug 2001
Posts: 4,270
Likes: 5
From: Delaware
Originally Posted by TMI
I bet you have enough torque you pull a little deeper gear.
Is it fun Dan???
Is it fun Dan???
I was following someone on this trip. I don't usually drive that conservatively. I may not be able to repeat that mileage, but I have another trip coming up this weekend, so I'll check it.
It is a lot of fun, but it's hard to open it up in traffic. I'm planning on a trip to Delmar Dragstrip in Delmar DE on May 20th. I also plan to take some video. My video camera is tape. I will need to get it digitized, unless I find someone with a Digital Video camera.
