just kidding bud. looks good, going to look better.
new here....kinda
Thread Starter
|
Senior User
Joined: May 2006
Posts: 455
Likes: 0
From: Saskatoon SK
51dueller- the vertical frame cut was a mistake. i should have done a diagonal cut.but it is plated on the inside, i will also be plating the edge and will be fishplating the outside. it was a big mistake and i dont want to take and chances with it breaking.
FirstTry- the search for the Dana 60 is coming along well, i have found a few but most guys want to much for them. i think i'm just goint to run my 44HD till it blows then frop down the cash for a good highpinion D60
66gpw- 51dueller is right about the tank. but that hole will be getting filled and i will be using a rear mount gas tank. coofe gatherings? where and when abouts?
FoMoKo- i owuld love to become a member of the sask/manit. chapter. how do i go about doing that?
preppypyro, 96sherm- thankyou for the compliments. i can only hope that when my truck is eventually finished that is will be as nice as some of the rigs i've seen around here.
FirstTry- the search for the Dana 60 is coming along well, i have found a few but most guys want to much for them. i think i'm just goint to run my 44HD till it blows then frop down the cash for a good highpinion D60
66gpw- 51dueller is right about the tank. but that hole will be getting filled and i will be using a rear mount gas tank. coofe gatherings? where and when abouts?
FoMoKo- i owuld love to become a member of the sask/manit. chapter. how do i go about doing that?
preppypyro, 96sherm- thankyou for the compliments. i can only hope that when my truck is eventually finished that is will be as nice as some of the rigs i've seen around here.
Posting Guru
Joined: Mar 2006
Posts: 2,054
Likes: 0
From: Salmon Arm
you should check out some of teh BC 4x4 sites, I will find that actual address's for you, can't think of tehm off hand, some pretty reasonable prices on there, might be cheap enough to make it reasonable to buy in BC and have it shipped
Moderator
Joined: Dec 2003
Posts: 97,540
Likes: 2,004
From: Saskatoon, Saskatchewan
Originally Posted by 77f-250HB
coofe gatherings? where and when abouts?
FoMoKo- i owuld love to become a member of the sask/manit. chapter. how do i go about doing that?
preppypyro, 96sherm- thankyou for the compliments. i can only hope that when my truck is eventually finished that is will be as nice as some of the rigs i've seen around here.
FoMoKo- i owuld love to become a member of the sask/manit. chapter. how do i go about doing that?
preppypyro, 96sherm- thankyou for the compliments. i can only hope that when my truck is eventually finished that is will be as nice as some of the rigs i've seen around here.
To join read this sticky at the top of the Man/Sask chapter forum: https://www.ford-trucks.com/forums/5...-requests.html
There are some nice trucks here and some of our`s aren`t done so we drive our old beaters. All kinds here which is great, nice to see them all including orginal, the works in progress and the finished ones.
Moderator
Joined: Dec 2003
Posts: 97,540
Likes: 2,004
From: Saskatoon, Saskatchewan
Originally Posted by FirstTry
Boss, its not nice to call the diesel a beater, no matter what Laredo says
My old 53 M350 is a beater for now, my 57 F350 and 69 F100 are nice orginals and my 05 F350 Lariat is nice.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Post Fiend
Joined: Apr 2006
Posts: 12,281
Likes: 1
From: Saskatoon Saskatchewan
Yeah man you probably have seen my driving the 93 around live in the north end lawson heights but go to school in the south end man your only 14 im so jealous you already got a nice project running along very sweet
lol im 16 but i do wanna project sooner or later myself like that (thinking 73-79 too)except dont got the space in the dam crowded city here
Be cool too meet you at one of the meets
lol im 16 but i do wanna project sooner or later myself like that (thinking 73-79 too)except dont got the space in the dam crowded city here Be cool too meet you at one of the meets
Thread Starter
|
Senior User
Joined: May 2006
Posts: 455
Likes: 0
From: Saskatoon SK
thanks for all the replys guys.
as for my truck....i would ahve never started it if i didnt have the right connections lol.
all my bodywork is free because i have a friend teaching me..
and i have a buddy that just open a offroad shop on sask ave(JR offroad designs, for Details PM or e-mail me) and a ton more.
plus i got a very helpful father and brother that are behind me in thi build.
i know some of you are thinking " ooh little boy gets to build a truck with dadys money" well your WRONG!! the only thing i'm using is dadys garge(my shop) and dadys power lol. other than that i am funding the build myself.....
as for my truck....i would ahve never started it if i didnt have the right connections lol.
all my bodywork is free because i have a friend teaching me..
and i have a buddy that just open a offroad shop on sask ave(JR offroad designs, for Details PM or e-mail me) and a ton more.
plus i got a very helpful father and brother that are behind me in thi build.
i know some of you are thinking " ooh little boy gets to build a truck with dadys money" well your WRONG!! the only thing i'm using is dadys garge(my shop) and dadys power lol. other than that i am funding the build myself.....
Thread Starter
|
Senior User
Joined: May 2006
Posts: 455
Likes: 0
From: Saskatoon SK
nope......i dont use his tools(exept for maybe the torque wrenches)
other than that i use my tools.
signet out of ontairio i belive....but i had to order them, very good quality!
other than that i use my tools.
signet out of ontairio i belive....but i had to order them, very good quality!
