Differance between 91Psd +95Psd?
Thread Starter
|
Senior User
Joined: Feb 2007
Posts: 239
Likes: 0
From: sticksville (Walsh AB. CA
The bumper I was looking at is after market with a winch built in I had hoped it would just bolt up I really don't care if it looks out of date I was just hoping it would fit
Elder User
Joined: Oct 2005
Posts: 597
Likes: 0
From: West Palm Beach, Florida
A lot of 91's had E4OD. Check the dash next to where the steering column goes in on the right next to the wait-to-start light. If it is an E4OD(electronic 4 speed with overdrive) there will be a button there that says Overdrive. If it doesn't have the button then it is the old C6(3 speed, long-lasting unit)
Posting Guru
Joined: Dec 2005
Posts: 1,034
Likes: 0
Originally Posted by F350_Hauler
A lot of 91's had E4OD. Check the dash next to where the steering column goes in on the right next to the wait-to-start light. If it is an E4OD(electronic 4 speed with overdrive) there will be a button there that says Overdrive. If it doesn't have the button then it is the old C6(3 speed, long-lasting unit)
Senior User
Joined: Apr 2004
Posts: 185
Likes: 0
From: Taylorsville, KY
they changed the body style in '92 so no the front bumper should not work. one thing that we are all missing here, unless I am just blind, is does your truck have a manual or auto transmission? if its manual, yes it will work, if it is auto it might work you would just need to figure out which auto tranny the '91 has. and I agree with Cuda_jim, I would see if I could make the winch work if it is a good deal.
Franklin
Franklin
Thread Starter
|
Senior User
Joined: Feb 2007
Posts: 239
Likes: 0
From: sticksville (Walsh AB. CA
The truck is a 91 f250 with a good topper winch on bumper and a manual tranny. my 91 has a4EOD(toast) broken box and 351 modified. My 95 PSD could use the Topper and the bumper if I could make it fit. The truck is going for 3500 firm. This is a nice looking truck from the pictures with some rust.
Last edited by Randy Pederson; Mar 19, 2007 at 12:38 AM.
