Timing set

Reply Subscribe

Thread Tools

Search this Thread

Mar 11, 2007 | 04:57 PM

Ford150/428/dud

Thread Starter

Senior User

Joined: Apr 2005

Posts: 453

Likes: 0

Timing set

Whats the amount of power if any can you get out of useing a straight up timing set verse a stock retarded one.

Mar 11, 2007 | 05:49 PM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

500HP at least, just like a FORD sticker for the windshield. Get both and it's off to the dragstrip...

Actually you will lose a few HP on the high end but gain a bit more torque down low. Just a few HP or ft-lb either way, 5-10 +/-.

Last edited by Torque1st; Mar 11, 2007 at 06:02 PM.

Mar 12, 2007 | 05:55 PM

Ford150/428/dud

Thread Starter

Senior User

Joined: Apr 2005

Posts: 453

Likes: 0

You made my heart jump for a second. LOL
Thats about that i figured so do you recomend running it like srtaight up or advanced.

Mar 12, 2007 | 10:30 PM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

Run it straight up.

Mar 12, 2007 | 11:19 PM

stretch351c

Senior User

Joined: Sep 2004

Posts: 102

Likes: 0

From: Stanton,Ne

Run it straight up. The only reason Ford put out the retarded timing set was for the emmision standards that came in. FYI it was a 4 degree retard.

Mar 15, 2007 | 07:01 PM

mercman78

Freshman User

Joined: Nov 2006

Posts: 37

Likes: 0

just a quick question,when would you want use the 4 degree advance or the 4 degree retarded key ways?is one setting better for a higher reving engine?

Mar 16, 2007 | 04:29 PM

DIRTY_D

Freshman User

Joined: Feb 2007

Posts: 26

Likes: 0

Ok i have a new 400 in my bronco from napa. Do you think the timing on this one is also retarded or come 0 degree?? Also can you use the same timing set if it is retarted and just advance it 4degrees. (this case if it is already new) Im wondering because im in a toss up doing a cam replacement and dont no if it would pay to get new timing set, being this on has 5,000miles on it...

10 Ugly Ford Trucks That We Still Kinda Love

Joe Kucinski

10 Things Every Truck Owner NEEDS (2026 Edition)

Michael S. Palmer

Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath

Verdad Gallardo

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Joe Kucinski

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Brett Foote

Top 10 Ford Truck Tragedies

Joe Kucinski

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

Brett Foote

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Michael S. Palmer

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Verdad Gallardo

10 Best Ford Truck Engines We Miss the Most!

Joe Kucinski

Mar 17, 2007 | 09:15 PM

stretch351c

Senior User

Joined: Sep 2004

Posts: 102

Likes: 0

From: Stanton,Ne

I'm not sure if it was 72 or 73 when Ford started the 4 degree retardation on their cams for these motors so anything later than that with a stock timing set would have in.

Mar 17, 2007 | 09:46 PM

#10

Mud Rat

Senior User

Joined: Apr 2004

Posts: 259

Likes: 0

From: Eastern Ohio

You need to decide what you want out of this powerplant. This engine is designed for torque more than horsepower. Tim Meyer has dyno results from the 400. It is interesting to note that the horsepower struggles to make 400 HP, but torque is in the range of 450 Ft Lbs. I'm a mudder and torque will bring you up and out of the mud.

Mar 19, 2007 | 10:05 AM

#11

job1bf

Mountain Pass

Joined: Dec 2001

Posts: 141

Likes: 0

From: collierville, tn

RE: retarded timing..
I have gotten two stories on this...I have read/heard they did not retard the timing on the trucks...just cars. Someone set me straight..thanks.