Ignition Switch
i ain't rite
Joined: Mar 2005
Posts: 65,507
Likes: 5,563
From: Marlboro Mental Hospital.
2 screws behind the wheel to take the pad off. once you have the pad off, you will need a steering wheel puller.
this sounds like one of those days where you need to call a friend that knows auto mechanics, and owes you a favor.
this sounds like one of those days where you need to call a friend that knows auto mechanics, and owes you a favor.
Tuned
Joined: Mar 2007
Posts: 258
Likes: 1
there are a couple of screws on the back side of the steering wheel that hold the the front cover on remove the cover and you should see how it comes apart, I do believe you will need a puller to seperate it after you take the nut off though. Fairly straight foward though. Just a thought though you make want to inspect the ignition switch and connecting rods before you tear the column all apart, I would take the two bolts the hold the column drop it down and see if it is binding up or anything.
Last edited by rkymtnman30; Mar 10, 2007 at 09:29 AM. Reason: add on
Thread Starter
|
Senior User
Joined: Jun 2006
Posts: 423
Likes: 0
From: Kodiak AK
Thanks for all the advice. I am being deployed on monday to get rid of a coast guard ship so i am going to put this project on hold till April. I was hoping for a simple solution. I did find a steering wheel puller at our auto hobbie shop on base so I am just going to pull it all apart and give it all a once over. I will repost when I get back with results. Thanks again to all that chimed in.
Thread
Thread Starter
Forum
Replies
Last Post
mep123
1987 - 1996 F150 & Larger F-Series Trucks
0
Oct 23, 2003 10:50 AM
sigtauenus
1973 - 1979 F-100 & Larger F-Series Trucks
9
Mar 15, 2002 10:45 AM
