Dash Removal
Thread Starter
|
New User
Joined: Oct 2005
Posts: 4
Likes: 0
Dash Removal
Help with dash removal to replace blend door and blend door motor. I have followed the alldata instructions but cannot figure out what I am missing. Is there any tricks that I am not doing. The dash is loose but hung on the top drivers side and will not come off. Please help.
Jim
Jim
New User
Joined: Mar 2006
Posts: 3
Likes: 0
There is one single screw that is located between the bottom of the speedometer recess and the top of the steering column that keeps it all from coming out. The steering column must lowered by loosening the nuts that hold it up to the dash, then a socket on a six inch extension can be used to take it out. It is difficult to see the screw head without a flashlight and it is impossible to see or remove without first lowering the steering column.
Thread
Thread Starter
Forum
Replies
Last Post
Sooner in Kansas
2007 - 2014 Expedition & Navigator
1
Nov 19, 2015 10:57 AM
shadtree4130
1968-Present E-Series Van/Cutaway/Chassis
9
Jan 1, 2015 09:49 AM
1yankees
1997 - 2006 Expedition & Navigator
9
Aug 11, 2008 09:55 PM
