Carb mounting bolts
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 49
Likes: 0
From: Lakeland, Fl
Carb mounting bolts
I have a 79 F-150 supercab with a 351m that I was replacing the carb on. Long story short among some things that came up missing was all the mounting bolts that hold the carb down, and clips that hold the accelerator bar(not sure what its called). If anyone could point me in the right direction with what size bolts those are I would greatly appreciate it. Thanks in advance.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Well first off, there should be studs coming out of the intake so normally it would be 5/16" NUTS you need... not bolts.
clisp for accelerator linkage clips.
You'll find them in the H.E.L.P. section at auto parts stores
clisp for accelerator linkage clips.
You'll find them in the H.E.L.P. section at auto parts stores
Thread
Thread Starter
Forum
Replies
Last Post
pierstar
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
7
May 27, 2017 04:26 PM
54321toz
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Mar 26, 2017 11:20 AM
19FordBoy81
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
Jan 8, 2017 08:13 PM
Rusty_S
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
41
Mar 13, 2016 09:50 PM
