Draining transfer case fluid....
Thread Starter
|
Senior User
Joined: Dec 2002
Posts: 329
Likes: 0
Draining transfer case fluid....
Hi guys, I have a 1990 Bronco. It has the E4OD tranny. My question is where do I get the tool to unscrew the drain plug and fill plug on the transfer case. What is the part called. By the way I have the Borg Warner 1356 Transfer case!! THANKS A BUNCH!!
Post Fiend
Joined: Nov 2002
Posts: 9,987
Likes: 7
From: Memphis, TN
Draining transfer case fluid....
If it's not just a 3/8" square recess pipe plug that a 3/8" ratchet fit, then it should be an allen-headed pipe plug. You just need a big allen wrench/allen key/hex key/hex wrench. It might be metric, but even a full set of metric & standard hex keys with balldrive ends is less than $30.
Doesn't it look like pic #11?
http://www.webphotos.com/list_photos.asp?mi=3&smi=2&a=95012
Doesn't it look like pic #11?
http://www.webphotos.com/list_photos.asp?mi=3&smi=2&a=95012
Senior User
Joined: Oct 2002
Posts: 214
Likes: 0
From: Hephzibah Georgia
Draining transfer case fluid....
just take a 3/8 drive ratchet or use a extension if you need to and loosen it. there is really no special tool needed. we do this with differential fill plugs in my high school auto shop.
Thread
Thread Starter
Forum
Replies
Last Post
blockson98
Clutch, Transmission, Differential, Axle & Transfer Case
5
Mar 3, 2007 03:31 PM
