TSB help
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
TSB help
Is there a "free" source for full text TSBs. I'm trying to determine contents of two TSBs for my daughter's 2002 Explorer. Both deal with cracking of the liftgate glass applique (the plastic panel that spans the lift gate just under the glass).
TSB # 15892, subj: rear liftgate cracks
TSB # 0485, subj: service procedures for liftgate glass applique damaged/cracked.
Thanks for any assistance anyone might be able to provide.
TSB # 15892, subj: rear liftgate cracks
TSB # 0485, subj: service procedures for liftgate glass applique damaged/cracked.
Thanks for any assistance anyone might be able to provide.
CO River Rat
Joined: Feb 2004
Posts: 3,209
Likes: 0
From: Lake Havasu City AZ
Here are a couple of sites that might help:
http://www.alldata.com/recalls/ &
http://www.odi.nhtsa.dot.gov/cars/problems/recalls/
Steve
http://www.alldata.com/recalls/ &
http://www.odi.nhtsa.dot.gov/cars/problems/recalls/
Steve
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
Tsb
Steve... Neither of those sites provide full text TSBs free. You can get summaries, i.e., subject and identification code. AllData is $24.95 for 12-month "membership". NHTSA charges $38 for a single page search/output. They may not be available for free on the internet; may have to get the dealer to print them for me. Thanks for responding.
John
John
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
"Just did one..." do you mean you replaced a cracked panel/applique. Can you share some of your experience with me. I was told by a body shop friend to use a heat gun to loosen adhesive, and remove in pieces. I'm assuming the channel will be a pain to get clean. Is it difficult to get the new panel in? Do you put the new adhesive in the channel before you start. If you could give me some "heads-up", I would certainly appreciate it.
Senior User
Joined: Feb 2004
Posts: 429
Likes: 0
Full text TSBs are available on this very site:
https://www.ford-trucks.com/tsb/fulltext/index.php
Click on the link, or scroll up to the top of your screen, and click on the "Recalls/TSBs" tab, then click on "Full Text TSBs".
https://www.ford-trucks.com/tsb/fulltext/index.php
Click on the link, or scroll up to the top of your screen, and click on the "Recalls/TSBs" tab, then click on "Full Text TSBs".
Trending Topics
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
Steve... I did that and all that shows up are 5 TSBs that are repeated many times. Neither of the 5 had anything to do with the cracked tailgate applique. I've used the link at the top to get the summary descriptions for the 2002 Explorer, and there are 2 dealing with the problem. Thanks for responding. John
Elder User
Joined: Feb 2004
Posts: 811
Likes: 0
Yes, I did replace the panel. Not an easy job, the applique is urathaned to the rear window. Yes, I did say window. remember, the applique is part of the bottom of the glass. So be careful when removing it. You have to cut the urathane and break the panel in pieces to get it off. There is a black reinforcement behind the applique, look closely don't cut it! then you need to clean everything off and use a special bonding adhesive from ford (which you won't have the tool to apply it) or use urathane adhesive. Just apply it back over the old that you cut and press in place use tape to hold it and let it dry.
Thread Starter
|
Tuned
Joined: Jul 2001
Posts: 432
Likes: 38
Thanks, Ranger; your info and the cost of the "stuff" I'll need to do the job have convinced me to have the body shop do it. Found out today that no one makes a matching color in a spray can, and a private party can't buy auto paint, thinner/reducer, etc. unless you have a workorder from an approved body shop. The 3M urethane adhevisive and a quart of cleaner is $32. Since I'm having to get the panel painted at the body shop, doing the rest of the job myself only saves me about $35--that's below my threshold for doing it. At least I got the local dealer to sell the panel for wholesale--$42. Thanks to all who have participated in this discussion.
Thread
Thread Starter
Forum
Replies
Last Post
Gevans17
1997 - 2006 Expedition & Navigator
6
Aug 13, 2024 03:17 PM
Gary Lewis
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
18
Jun 7, 2017 10:06 PM
Gage2502
1997 - 2006 Expedition & Navigator
8
Jun 17, 2010 09:50 AM
