V10 2wd Ex Air Springs
#1
V10 2wd Ex Air Springs
Hey guys i have a 2001 2wd Excursion with AIR BAG SPRINGS in the rear it has the tow package. my question is what is the right Pressure the airbags should be inflated too?? thier is 2 shrader valves under the rear bumper for filling and deflating.. what do u guys use for PSI?? I got 20psi right now..thanks guys..
Last edited by Byos; 11-21-2006 at 04:45 PM. Reason: spelling
#2
I assume you're not the original owner who installed the air-bags. In that case, have you determined what brand air-bags you have? After you've done that, you can research the manufacturer's website for info. I don't have 'em on mine, but I do recall hearing somewhere that some folks deflate them to about 5 to 10 PSI.
Anyone else wanna' chime in with better PSI values?
Anyone else wanna' chime in with better PSI values?
#3
Originally Posted by cficare
I assume you're not the original owner who installed the air-bags. In that case, have you determined what brand air-bags you have? After you've done that, you can research the manufacturer's website for info. I don't have 'em on mine, but I do recall hearing somewhere that some folks deflate them to about 5 to 10 PSI.
Anyone else wanna' chime in with better PSI values?
Anyone else wanna' chime in with better PSI values?
#4
#5
#6
#7
Originally Posted by cficare
Ditto the post above in that air-bags were never installed by the factory. May have been installed by a selling dealer, but not by FoMoCo.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
wolfrace
1999 - 2003 7.3L Power Stroke Diesel
27
06-17-2010 03:08 PM