how does one add a signature?
Thread Starter
|
Freshman User
Joined: Oct 2006
Posts: 43
Likes: 0
how does one add a signature?
I have not seen where the instructions are for adding a signature....I saw the definition but can not figgure out how to add one. Your help would be appreciated.
Thanks
Steve
Thanks
Steve
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
Read:
https://www.ford-trucks.com/forums/5...-policies.html
Signature editing is done in the USER CP.
https://www.ford-trucks.com/forums/5...-policies.html
Signature editing is done in the USER CP.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Shaq, It depends what you intend to put in the sig and how you want it to show up.
Once in your CP
On the top left is edit Signature.click that and up will come a signature Message box.
Type in your content then click " Save Signature"
then back out to the forum pages and check one of your posts.
Each piece of code is considered a character.
ie: the brackets []are one character each
If you want bold you use
ending in
You are allowed 250 characters
Once in your CP
On the top left is edit Signature.click that and up will come a signature Message box.
Type in your content then click " Save Signature"
then back out to the forum pages and check one of your posts.
Each piece of code is considered a character.
ie: the brackets []are one character each
If you want bold you use
ending in
You are allowed 250 characters
New User
Joined: Jan 2007
Posts: 16
Likes: 0
From: Fredericton
Its not my intention to persist with this but one final question. Does the "edit signature" come up under Control Panel:Settings & Options?? If so it is not available to me nor can I locate elsewhere in the menus.
Anyway, thanks again.
Mike
Anyway, thanks again.
Mike
New User
Joined: Jan 2008
Posts: 0
Likes: 24
No problem
Yes at the top left hand corner.
I just noticed you only have 10 posts.
You need to have at least 25 posts with GOOD CONTENT to be able to have a sig.
Make sure your posts have valid content as FTE diapproves of Users "Post Padding" to get to a certain level.
Just keep interacting with people and that level will be achieved normally
Yes at the top left hand corner.
I just noticed you only have 10 posts.
You need to have at least 25 posts with GOOD CONTENT to be able to have a sig.
Make sure your posts have valid content as FTE diapproves of Users "Post Padding" to get to a certain level.
Just keep interacting with people and that level will be achieved normally
Trending Topics
New User
Joined: Jan 2007
Posts: 16
Likes: 0
From: Fredericton
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Posting Guru
Joined: Jan 2007
Posts: 1,233
Likes: 0
From: shawnee KS
I understand the whole 25 good quality posts, is there somewhere i can see how many I have? This is my second go round as a member of this awsome site, as I was without internet for a long while.
Posting Guru
Joined: Jan 2007
Posts: 1,233
Likes: 0
From: shawnee KS
OK, guess I'm an idiot, I still don't see it. I had a sig. under my old name, I just don't remember how. I can work on these ford trucks, but a computer to me is kinda like kryptonite to superman.
Thread
Thread Starter
Forum
Replies
Last Post
danshula
General NON-Automotive Conversation
16
Jan 2, 2006 02:48 AM
