When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok...just wanting to replace my PCV and looking at my 2003 V10...I see to hoses going into the valve covers. Do not want to disturb the hose that has nothing to do with PCV...
So...Which side is the PCV valve on my V10??? Driver or passenger side? Is it on one of the valve covers? OR is it on the intake manifold???
The PCV is on the Pssgr side on my 02.. It is towards the back..It has several hoses hoses hooked onto it. You just pull up on the hoses and the PCV will come right out.
Thanks for the tip Big Rig! Will take a look at it tomorrow morning. So...what does the PCV go into? Valve cover or intake manifold? Lets see if the SD and EX are the same...(fingers crossed)!
Thanks Guys! YES, the PCV valve is on the passenger side valve cover. What had me "over" thinking it...was the 90 degree elbow that came on the "NEW" PCV valve. I was looking for a 90 degree out from the valve cover.
So...just remove the 90 degree elbow...and carefully pulled the old PCV valve...and replaced with the NEW.