C-6 transmission

Reply Subscribe

Thread Tools

Search this Thread

Sep 23, 2006 | 06:43 PM

bbussman40

Thread Starter

Junior User

Joined: Mar 2006

Posts: 81

Likes: 0

C-6 transmission

Does anybody know about a antivibration weight for a c-4 or a c-6 transmission.
What do they look like and where might I find one?

Sep 23, 2006 | 08:49 PM

manglass

More Turbo

Joined: Feb 2004

Posts: 704

Likes: 40

I remember weights attached to the extension housing. There should be a cast-in ridge along the bottom with 3 or 4 holes for the purpose. The weights looked like a bunch of stacked plates with 2 of them extended and the correct distance apart to fit on either side of the cast-in ridge. The bolts went through one plate, through the ridge, and out the other side through the other plate. I think just about all cars used them so look for anything with a C-4 or C-6 transmission. Possibly a Torino, Fairmont, Mustang, T-Bird, even a big Ford from the 70's or 80's. I don't remember them on trucks but they may have been used there too. Good luck with your search.

Lou