Lokar Accelerator Cable

Reply Subscribe

Thread Tools

Search this Thread

Apr 19, 2001 | 10:27 AM

William

Thread Starter

Logistics Pro

Joined: Feb 2000

Posts: 3,565

Likes: 9

From: Sun River St. George

Lokar Accelerator Cable

I intend to install a Lokar accelerator cable, transmission kick down and cruse control on my 390 with C6 and Edelbrock 1406 carburetor. I will use Edelbrock brackets and Lokar return springs. I will use the Ford accelerator pedal. This truck is not a show truck but I want this setup to be perfect. Anyone with experience using Lokar parts? Part numbers? Prices? Comments. My current project truck is a 66 F100 with 390 CI and a C6.
William in Atlanta

Apr 23, 2001 | 11:20 AM

artskyd

Junior User

Joined: Sep 2000

Posts: 51

Likes: 0

From: indianapolis IN.

Lokar Accelerator Cable

A few years ago I tried a Lokar accelerator cable on my 66' six cylinder. I didn't have good luck with it. It didn't work well with the sharp bends it needed to make to get to the carb. I searched the bone yards and found another stock one. Maybe things have changed since then, but I wasn't happy with the nylon sleeve that the cable ran through. It kept binding up on me.

artskyd