79 Coil spring install?
Lead Driver
Joined: May 2000
Posts: 9,236
Likes: 12
From: Senoia, GA
are you sure you are putting everything together right? what about the coils, are they for that truck?
looks to me like the bottom spring retainer could be turned 180* and bolt down to the part of the coil thats flush against the coil cup (i think you mentioned that but i wanted to make sure)
-cutts-
looks to me like the bottom spring retainer could be turned 180* and bolt down to the part of the coil thats flush against the coil cup (i think you mentioned that but i wanted to make sure)
-cutts-
Thread Starter
|
Post Fiend
Joined: Mar 2005
Posts: 8,542
Likes: 5
From: Louisiana
There's only one way the spring can go.
I ordered 78 79 bronco 6" lift superflex coils, and I'm assuming that's what they sent.
I know I need to rotate the bottom retainer, but that messes up the top.
I guess the best thing to do would be to drill new holes.
I ordered 78 79 bronco 6" lift superflex coils, and I'm assuming that's what they sent.
I know I need to rotate the bottom retainer, but that messes up the top.
I guess the best thing to do would be to drill new holes.
Thread
Thread Starter
Forum
Replies
Last Post
MikeWire
1973 - 1979 F-100 & Larger F-Series Trucks
19
Sep 9, 2007 10:48 PM
