Custom Grill Material......
Thread Starter
|
Elder User
Joined: Aug 2003
Posts: 624
Likes: 0
From: Houston, TX
Custom Grill Material......
As most of the regulars here know, I'm getting my '91 Star ready for paint. Just lacks the rear bumper before it goes. I do want to change the front end appearance a little and I've been toying with the idea of a new grille. My idea is to take the extra grill from my parts van and remove all the grey plastic stuff and just keep the chrome colored part. To this I want to attach my "custom grill material" and then stick a nice size FORD oval in the middle.
What I can't seem to find is a mesh material. I don't want it pre-cut, I want to be able to buy a piece say 12" by 38" and then shape and cut it myself. The type of material I am looking for is used on one of the Chrysler 300 series cars. It is an interwoven wire. Can anyone tell me where I can get something like that?
What I can't seem to find is a mesh material. I don't want it pre-cut, I want to be able to buy a piece say 12" by 38" and then shape and cut it myself. The type of material I am looking for is used on one of the Chrysler 300 series cars. It is an interwoven wire. Can anyone tell me where I can get something like that?
Lead Driver
Joined: Sep 2003
Posts: 7,013
Likes: 205
From: SoCal
How about this stuff:
http://www.pegasusautoracing.com/pro...p?Product=3640
It's stainless steel, and very strong. This is the finest grid they have; they also have two coarser grids.
http://www.pegasusautoracing.com/pro...p?Product=3640
It's stainless steel, and very strong. This is the finest grid they have; they also have two coarser grids.
Thread
Thread Starter
Forum
Replies
Last Post
9explorer8
Explorer, Sport Trac, Mountaineer & Aviator
2
Mar 28, 2004 06:08 PM
