Replacement cabs?
Replacement cabs?
Does any place make replacement cabs? I have besides my Camper Special a 1979 F250 Highboy. The cab is rotted. It leakes around the windshield, holes in the floor boards, and the rear is rusting out. I could fix all of this if need be, but I would like to now my options before I would start restoration.
1971 F250 Camper Special w/ 390ci
1979 F250 Highboy w/ 351M/400
1971 F250 Camper Special w/ 390ci
1979 F250 Highboy w/ 351M/400
Replacement cabs?
[font size="1" color="#FF0000"]LAST EDITED ON 04-Jul-01 AT 04:23 AM (EST) by StockMan (moderator)[/font][p][font size="1" color="#FF0000"]"Post Clean-up Completed"[/font]
I have run across a website that you might jump up and down about. It is "Web adress: World Wide Web. #####. As far as i can tell they sell everything you can get for a ford truck or bronco. Good luck. CrazyPurpleChevyEater.
well they wont show the adress so contact me:
I have run across a website that you might jump up and down about. It is "Web adress: World Wide Web. #####. As far as i can tell they sell everything you can get for a ford truck or bronco. Good luck. CrazyPurpleChevyEater.
well they wont show the adress so contact me:
Replacement cabs?
Richard, sure you can buy a replacement cab. I have seen new ones available in fiberglass with steel reinforced floors. I would imagine the price is rather spendy however. Have you tried looking for one off from a truck that had an expired engine ? DF
Replacement cabs?
US body makes fiberglass replacements for trucks going back to as far as 65 I think. They are around 5K though.
People who say it can't be done should not interrupt the person doing it.
People who say it can't be done should not interrupt the person doing it.
Replacement cabs?
Boss thanks for the US Body site, now I know where to get my tilting front clip 

Trending Topics
Replacement cabs?
Why not get a cab from the west coast?? There is so many rust free cabs lurking around that you can't shake a stick at all of them. You can buy the whole truck for about $500, sometimes cheaper depending on what's wrong with it. I picked up my '73 for $300!!! I got him to throw in the new set of 31x10.5x16.5" BFG T/A's and new rims for another $400, they had less than 1k on them(worth $800 alone!!). In my book this was a steal! Super cabs are a bit tougher to find, but are still out there waiting to be had at a song of a price too!
TTYL
Tony
:-X11
'74 F250, 460, C6, "Beater" (paid $350 for it - lots of body damage)
'73 F250, 360, C6, "Midnight auto" (paid $700 for it, bad grille, fender)
'77 F250, 4X4, 351M "Flamer" (paid $900 for it, but had a blown up rear end)
TTYL
Tony
:-X11
'74 F250, 460, C6, "Beater" (paid $350 for it - lots of body damage)
'73 F250, 360, C6, "Midnight auto" (paid $700 for it, bad grille, fender)
'77 F250, 4X4, 351M "Flamer" (paid $900 for it, but had a blown up rear end)
Welcome to FTE and the Bumpside (67/72 ) kingdom.
But you posted this in the wrong area. We are 1967/1972. You need to be in the 73/79 Dentside area. The roof is specific to 73/79 F100/350 body style.
The part number was D3TZ1050202A for regular cabs. No dealer or N.O.S. company has it on my locators. You'll have to grab one at a JY or PNP locally. Cr@igs list maybe. Of try FTE's "market place. Click on it in the black band top of this page.

But you posted this in the wrong area. We are 1967/1972. You need to be in the 73/79 Dentside area. The roof is specific to 73/79 F100/350 body style.
The part number was D3TZ1050202A for regular cabs. No dealer or N.O.S. company has it on my locators. You'll have to grab one at a JY or PNP locally. Cr@igs list maybe. Of try FTE's "market place. Click on it in the black band top of this page.









