360engine conversion
Thread Starter
|
New User
Joined: Oct 2002
Posts: 2
Likes: 0
From: flint usa
360engine conversion
I have a brush grinder with a 1971 360 engine that let go,other than 352 0r 390 etc what else might fit this bellhousing pattern and flywheel combo, possibly some 6 cylinder ? pto is rockwell, or does anyone nearby have a engine avaliable?Please answer here or contact fire5050us(No Email Addresses In Posts!) Thanks Tim
Fleet Owner
Joined: Jun 1999
Posts: 24,552
Likes: 74
From: Creedmoor, North Carolina
360engine conversion
Tim, You didn't give us a clue where you are, but there bookoos of 360s, 390s and 352s out there available. There are other engines in that family but those three are the most prominate. The FE has a uneek round top bell that is different from the other two that Ford used, so no the I-6, 302, 351 etc. wont fit. 
http://www.clubfte.com/users/jowilker/USFlag.gif
John
jowilker email me
[link:www.ford-trucks.com/users/jowilker|My Club FTE Page] Member 0004 since 01 01
[link:www.ford-trucks.net/users/jowilker/NCFTE.html|NCFTO] North Carolina Ford Truck Owners Group
In the cool still quiet of night, you can hear chevies rusting away.
http://www.clubfte.com/users/jowilker/USFlag.gif
John
jowilker email me
[link:www.ford-trucks.com/users/jowilker|My Club FTE Page] Member 0004 since 01 01
[link:www.ford-trucks.net/users/jowilker/NCFTE.html|NCFTO] North Carolina Ford Truck Owners Group
In the cool still quiet of night, you can hear chevies rusting away.
Senior User
Joined: Aug 2002
Posts: 309
Likes: 0
360engine conversion
Ouch, I'm clear in Oregon near the coast. Still yet, their should be plenty around that you could get without having your pants brought down over the price. Typically a 390 should go for around $500, which is what i want out of mine.
Thread
Thread Starter
Forum
Replies
Last Post
boxer.fan
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
43
Apr 2, 2009 04:33 PM
