Dipstick tube
Thread Starter
|
Junior User
Joined: Nov 2004
Posts: 60
Likes: 0
From: Grapeview, WA
Dipstick tube
I put some Sanderson headers on the 351W going into my '55 F100, but not sure how to handle the dipstick tube. It goes into the drivers side of the oil pan and was bolted to the stock manifold. Now it just hangs out there in space. Any advice?
Thanks, John
Thanks, John
Junior User
Joined: Apr 2005
Posts: 88
Likes: 0
I Have Just Finished Fixing The Same Problem What I Ended Up Doing Is Building A Custom Tube For The Stick A Piece Of 3/8 Staniless Tubeing Worked Great For Me And I Made A Bracket That Ran Over To My Block. Work Out Great And Dosent Look Bad Either. If You Decide To Try This Make Sure You Note Your New Oil Level. Mine Did Change A Little.
Thread
Thread Starter
Forum
Replies
Last Post
black58
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
Sep 23, 2011 06:31 PM
jniolon
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
Apr 10, 2011 10:14 AM
jbulson
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Nov 2, 2002 11:02 AM
