Splitting Rounds
Elder User
Joined: Jun 2004
Posts: 513
Likes: 0
From: Zimmerman, MN
I split all our firewood at the cabin, and it really depends on the wedge. I have a thick one (newer) and a thinner one (older), and I use the thin one to really crack into rounds that are still green. I use a smaller maul to get the wedge started, and have sharpened the thin wedge down to a rather fine edge.
I also look at the cut face of the round and look for a natural crack that may have started in the wood.
The cabin is loaded with Oak, and that stuff is a bear to split sometimes.
I also look at the cut face of the round and look for a natural crack that may have started in the wood.
The cabin is loaded with Oak, and that stuff is a bear to split sometimes.
Thread
Thread Starter
Forum
Replies
Last Post
wezol5484
General NON-Automotive Conversation
33
Nov 17, 2010 05:36 PM
I6power
General NON-Automotive Conversation
18
Jan 19, 2006 06:37 AM
