When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ANy interest in a get together in Fairfield COunty somewhere??? Im from Stamford abnd would love to get together withg ya guys and see some nice trucks for a change. Let me know. Thanks
Im up for another get together. LB3711 pick some place close to Trumbull as you have had to drive for all the other meets. We will have to make the car meet later as the AMCs are still not back together yet.
Bobs AMX (BWAMX) still needs the rear end fixed. Snaped an axle at the drags in the fall. Must have something to do with the 6500 RPM launcheswith sticky tires. It also took out the end of the carrier. He will have to go with 35 spline and new axles this time. Maybe bump up the gear ratio also.
Mine is still at the body shop getting new paint. I should have mine back in a couple of weeks and then still have to put it all back together. Im shooting for mid May. I still need to fix the dist and install the alum heads besides put the body back together. Remember we do this all in the name of fun.
I will get back to you with lists on cruise nights and shows. Hemmings always has a pretty good list.
Im up for another get together. LB3711 pick some place close to Trumbull as you have had to drive for all the other meets. We will have to make the car meet later as the AMCs are still not back together yet.
Give me a few and I'll get back to ya. I usually start car meets here at the house. We can do it at my local park in town as long as one of my vehicles are there for a park sticker. Park in trumbull would work if ya want. This is the park a good place for pics http://pg.photos.yahoo.com/ph/lb3711...3711/my_photos
I'd be interested. I'm new here at FTE. Although, I've been driving Ford trucks most of my life. I just picked up my first SD. I couldn't afford new, but got a good deal on a 01 F250 Super Cab with a 5.4 Eng.
After browsing quite a bit on the forum, I've picked up some ideas for mods. Already taken care of the exhaust and intake. Now I'm just geting ready to program it up with ny new Superchip.
Any old how, keep me up to speed on any meets. I'm located in Shelton.