measurements

Reply Subscribe

Thread Tools

Search this Thread

Mar 29, 2005 | 11:04 AM

fatfenders56

Thread Starter

Cargo Master

Joined: Jan 2005

Posts: 2,497

Likes: 5

From: Tucson AZ

measurements

could someone give me the flange to flange measurement of an original front axle? I just need it for reference. Thanks in advance FF56

Last edited by fatfenders56; Mar 29, 2005 at 11:08 AM.

Mar 30, 2005 | 02:58 PM

minuteman

Freshman User

Joined: Jul 2004

Posts: 36

Likes: 0

From: Ovett, Mississippi

I will have to measure mine at home and let you know tomorrow.

Mar 30, 2005 | 08:36 PM

fatfenders56

Thread Starter

Cargo Master

Joined: Jan 2005

Posts: 2,497

Likes: 5

From: Tucson AZ

thanks, I'll be looking

Mar 30, 2005 | 09:44 PM

54fever

Senior User

Joined: Feb 2004

Posts: 253

Likes: 0

From: new jersey

Hi FF56,
The measurement on my 54 front axle from flange to flange is 56" i hope this is what you were looking for, this measurement is from the back of the flanges. hopefully minuteman will come up with the same measurement.

Mar 31, 2005 | 08:22 AM

fatfenders56

Thread Starter

Cargo Master

Joined: Jan 2005

Posts: 2,497

Likes: 5

From: Tucson AZ

that sounds pretty good, I'll wait to hear from M/M, I am building some a-arms and lower control arms for a Lincoln subframe and needed a ballpark to work from. thanks

Apr 4, 2005 | 07:56 AM

minuteman

Freshman User

Joined: Jul 2004

Posts: 36

Likes: 0

From: Ovett, Mississippi

The measurement from the back of the backing plate to back of backing plate was 55-5/16". Hope this helps and sorry it took so long. I don't have the modern conviences of computers at home.