Engine computer wiring
Thread Starter
|
Senior User
Joined: Apr 2000
Posts: 396
Likes: 0
Engine computer wiring
I am wondering a if anyone could tell me what wire it is that powers the efi computer on my 88 f150. I need the wiring color and if possible the pin number at the computer connector. I was also wondering if anyone could tell me a good way to get my fuel milage better. I know it has to do with the o2s, I just replaced it and my mpg is better, but the right exhaust pipe looks ok (this is the pipe the o2s is in), but the left pipe is sooty black, which I think has to do with the fact that my efi is not monitoring that side like the right since there is no o2s in that side. Any ideas on how to get the computer to read both sides effectively be great. Thanks!
88 F-150 4X4 XLT Lariat w/5.0 EFI 5 spd (DAILY DRIVER)
86 Ranger 2WD w/2.3L EFI 5 spd to be 351W 4bbl C4 (NEW TOY- DETAILS WHEN FINISHED)
85 Old Cutlass Supreme 350/TH350 Holley 4160,Edelbrock Performer intake, el-cheapo headers, High Energy Cam 270H series cam, 15.588 best 1/4 mile with original 10 bolt 2.41 gears (OLD TOY)
88 F-150 4X4 XLT Lariat w/5.0 EFI 5 spd (DAILY DRIVER)
86 Ranger 2WD w/2.3L EFI 5 spd to be 351W 4bbl C4 (NEW TOY- DETAILS WHEN FINISHED)
85 Old Cutlass Supreme 350/TH350 Holley 4160,Edelbrock Performer intake, el-cheapo headers, High Energy Cam 270H series cam, 15.588 best 1/4 mile with original 10 bolt 2.41 gears (OLD TOY)
Thread
Thread Starter
Forum
Replies
Last Post
Mudman
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Sep 18, 2006 09:41 AM
cbwarrior
Performance & General Engine Building
3
May 5, 2001 07:47 AM
